2003.10.20, 10:22 PM
|
#46
|
Master of Thrash
Join Date: Oct 2002
Location: Arkansas
Posts: 4,980
|
Thanks xalex0000 I see what you are talking about.I still have to wait till the parts are more plentiful,I missed out on the servo saver and a few other parts.hopefully around December I may get started on it.After looking at the pics of the servo gears I thought the servo would be backward from the gears to the servo saver would make it operate in the other way.The board I have for the MR01 is about 2 years old so I may retire it and get a new one,leaning toward the MR02 if I can get one.I have two MR01s right now,the first one is the two year one the other one is only about one year so far.The oldest one I may put in a MR02 chassis the one it's in now is seen a few too many shots to the wall.Held together with CA and rubber bands.
Last edited by HammerZ; 2003.10.20 at 10:40 PM.
|
|
|
2003.10.21, 12:21 AM
|
#47
|
Registered User
Join Date: Aug 2003
Location: FLorida
Posts: 902
|
Yo Alex! nice job, man I didnt know you went throught all this to get it work.
anyhow, I drove his car today an it handles great compared to when it was a M01. This is a very good mod!
alex come race wednesday man!
|
|
|
2003.10.21, 12:31 AM
|
#48
|
Registered User
Join Date: Aug 2003
Location: Japan
Posts: 189
|
Congratulations, xalex0000!
I'm very happy to hear of your seccess.
|
|
|
2003.10.21, 04:53 AM
|
#49
|
Aargh! get me outta here!
Join Date: Aug 2003
Location: Under My Desk
Posts: 100
|
Ikinari, for the png, Domo!!
Xalex, great work mate, hope to do the same soon!!!
__________________
The Buck starts Here...
|
|
|
2003.10.21, 10:41 AM
|
#50
|
Mini-Z Pro
Join Date: Aug 2003
Location: Florida
Posts: 100
|
:)
Hey, thanks fot the complements guys ! Thanks to you guys help i was able to pull this off ! like ProfoxCG says, It does handel much Better .next step is tuning the car and painting the body . Hehe . . .
- Whats up ProfoxCG, dude im not sure, if im going to race on wednseday. Got to get rid of that bouncy tail. Maybe ill give it a go. i dont know. maybe ill see you today at the track when i go to practice.
|
|
|
2003.10.21, 11:21 AM
|
#51
|
Registered User
Join Date: Aug 2003
Location: FLorida
Posts: 902
|
I will be there tonight fine tunning my enzo for tomorrow . I look forward so much to race nights !
|
|
|
2003.10.21, 01:54 PM
|
#52
|
Registered User
Join Date: Aug 2003
Posts: 32
|
Hi Xalex000.
I want a MR15 too, hehe !!
What parts do you need for make the upgrade to MR15?
Please can you post the parts you use for your project?
Thx a lot and sorry for my english, Im learning
|
|
|
2003.10.21, 02:09 PM
|
#53
|
Mini-Z Pro
Join Date: Aug 2003
Location: Florida
Posts: 100
|
Hello
These are the parts you need
These are the part you need to assemble it :
Kyosho (#MZF201C) Skeleton Chassis Set For MR02
Kyosho (#MZ203) Front Sus. Parts Set For MR02
Kyosho (#MZ205) Servo Saver Assembly For MR02
Kyosho (#MZ202) Small Parts for Chassis
or insted of the skeleton (translusent) you can get a regular mr02 chasis wich is cheaper also. My Kyosho (#MZ202) Small Parts for Chassis hasent arrived yet so im using to pices that i made myself. Im not sure if ill bother in putting the new peace that will arrive, on the car since mine work well. So i realy used just the first 3 element form the list.
Good luck on your convertion.
ps: My english is not that good also.
|
|
|
2003.10.23, 03:04 AM
|
#54
|
Master of Thrash
Join Date: Oct 2002
Location: Arkansas
Posts: 4,980
|
What pieces,the servo gear plates?Can you tell me more about how you made them?Did you cut down the plates from the MR01 servo?Thanks in advance.
Last edited by HammerZ; 2003.10.23 at 03:07 AM.
|
|
|
2003.10.23, 07:58 AM
|
#55
|
Moderator
Join Date: Sep 2002
Location: Washington, DC
Posts: 35,480
|
Re: Hello
Quote:
Originally posted by xalex0000
...ps: My english is not that good also. [/B]
|
your english is much better than my spanish (minizz.com)
|
|
|
2003.10.23, 08:04 AM
|
#56
|
Registered User
Join Date: Aug 2003
Location: FLorida
Posts: 902
|
Success story !
I am happy to say that alex's car is driving very good, I noticed a great handling improvement last night while I was warming up !!
awesome results !
|
|
|
2003.10.23, 08:10 AM
|
#57
|
Registered User
Join Date: Jun 2003
Location: Singapore
Posts: 348
|
Re: Whats up hammer
Quote:
Originally posted by xalex0000
her Hammer, This is how i reversed my servo.
1- I reversed the wireing on the potentiometer.
2- I reversed the wiering on the servo motor too .
Here im including a graph on how i did the potientometer.
Hope this helps. please be very carfull with the pcb !
|
Thanks! I noted it down this time
|
|
|
2003.10.23, 01:13 PM
|
#58
|
Mini-Z Pro
Join Date: Aug 2003
Location: Florida
Posts: 100
|
Thanks profoxcg, What a difrence, this conversion has gone really well, better than i expected. But your enzo still Kicks A$$.... . profoxcg youve got a nice setup in that car !.
Hey what are you tlaking about arch2b ? , your spanish is pretty good too . I was impresed .
Hammerz, the peaces that i maid dint have nothing to do with the servos, It was just a simple small peace of plastic whith a hole in it so i can use it to secure the tabs that make contact between the wire that comes from the pcb and the battery conection on the chasis.
Miketre, Your welcome and thank you too
|
|
|
2003.10.23, 01:19 PM
|
#59
|
Mini-Z Pro
Join Date: Aug 2003
Location: Florida
Posts: 100
|
hey arch, im not sure but maybe i didnt, I thought i read something you worte in spanish at minizz or somewhere else ?
|
|
|
2003.10.23, 03:14 PM
|
#60
|
Master of Thrash
Join Date: Oct 2002
Location: Arkansas
Posts: 4,980
|
Quote:
Originally posted by xalex0000
Hammerz, the peaces that i maid dint have nothing to do with the servos, It was just a simple small peace of plastic whith a hole in it so i can use it to secure the tabs that make contact between the wire that comes from the pcb and the battery conection on the chasis.
|
Oh,ok that is not so tough.good thing it's not the gear plates,That would be a real pain to line up those small parts.Just the tabs to connect the PCB to the chassis.Whew,what a load off my mind.Again thanks,you have once again shed light on a grey area.
Last edited by HammerZ; 2003.10.23 at 03:17 PM.
|
|
|
Thread Tools |
|
Display Modes |
Rate This Thread |
Linear Mode
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 12:42 AM.
|
|