i ran stock 2.4 pcb with Atomic Stock-R before on AWD, the only problem i faced was the board will shut down once a while and after mild to hard impact to the RCP track.
I've been running a 31t spiral handwound in my ASF, but the initial punch is a bit softened from what it *would* be like with a 2x2 stack of 4562's or 8858's. Great for Mod 2WD, I'd say.
FYI... A single stack will run faster on the PN70t than a double stack
When I say single I mean 4 chips.. 2 on top and 2 on bottom.
When I say double 4 on top 4 on bottom..
Has everyone here have the same experience? I feel that my 70t feels slower with my single stack (4 FET) 2.4 board than it did with a triple stack (6 FET) AM board. Should I not add another stack to my 2.4 board then?
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»