That reconfigurable mount is a real treasure hunt to figure out... you go to one part with reference to another, and another, and another... I would assume you could buy either the 94mm or 98-100mm pod kit (the latter is the only one in stock) and then buy the bottom plate and motor mount arm? I've never run this setup for 90mm and would be interested in trying.
Exactly right and as bobbyz mentioned part number for bottom plate is mr2996cf4 and an RM motor mount ( blue version MR2999RB). with the smaller diameter brushless motor you want to mount the motor mount below the carbon fiber upper plate for an additional 1.75mm drop in motor position for super low CG. some shaving of parts will be necessary though but if your going for gold medal performance it's well worth it. same lower motor mount trick works with 94mm reconfigurable, simply the fastest 94 mount out there. & yes this is faster than the squished MM.
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»