2012.02.21, 12:27 PM
|
#1
|
Registered User
Join Date: May 2006
Location: Kannapolis, NC
Posts: 380
|
Carolina Cup race
Alright guys time to start throwing around some ideas. We are over due to start the Cup season. We need to start tossing around some dates and local for the event. With our current group of racers and the addition of others coming in for the event I'm not sure HSH can handel the event.
Ant ideas,
Wade
|
|
|
2012.02.21, 12:32 PM
|
#2
|
pyschopath racing
Join Date: Jan 2011
Location: kannapolis,nc
Posts: 649
|
how about april 21st thats the 3rd sat of april so u know r guys would be ready and thats over a month for the beach guys to make that date open
as far as location thats on u guys cause i wouldnt know any one with that kind of room
|
|
|
2012.02.21, 04:27 PM
|
#3
|
MBMZR
Join Date: Dec 2006
Location: Myrtle Beach, SC
Posts: 3,274
|
I have been in contact with Philip, and will be hosting a PN regional event on April 14th. I have just been holding off on the event thread, as I am in need of the updated rules and classes so I can post everything all at once.
I think the 21st would be a little close for us to get maximum participation out of both events, but if the Cup race could slide to the 28th, or the first Saturday in May, then I am sure our guys would be able to participate.
We do need to get moving on something though. Thanks for pushing the ball a little Wade. Let's get it rolling for good
__________________
Landon
LET's Go Racing!
|
|
|
2012.02.21, 04:36 PM
|
#4
|
pyschopath racing
Join Date: Jan 2011
Location: kannapolis,nc
Posts: 649
|
the 1st sat in may is the 5th
|
|
|
2012.02.21, 05:30 PM
|
#5
|
Registered User
Join Date: May 2006
Location: Kannapolis, NC
Posts: 380
|
No problem Landaon. I'll be in contact..
Wade
|
|
|
2012.05.10, 11:52 PM
|
#6
|
Registered User
Join Date: May 2006
Location: Kannapolis, NC
Posts: 380
|
Alright it's official: Round 1 in this years Carolina Cup will be Saturday June 2, 2012..
Details to come...
Wade
|
|
|
2012.05.11, 06:45 AM
|
#7
|
PN Racing Team Driver
Join Date: Feb 2009
Location: Myrtle Beach, SC
Posts: 1,700
|
woo hoo...........
__________________
PN Racing
R1Wurks
LET's Go Racing
MBMZR
DG Designs
|
|
|
2012.05.15, 07:39 AM
|
#8
|
Registered User
Join Date: May 2006
Location: Kannapolis, NC
Posts: 380
|
Join us for the first Carolina Cup Race of the 2012 Season. We will be racing at High Speed Hobbies in China Grove, NC Indoor RC Track. This will be our first event of the Carolina Cup Challenge 2012, Saturday June 2, 2012 featuring the nearly unlimited, superfast CanAm1 Class! We will also be running the competitive LM2 LeMans Prototype Class 70t hand out motors and of course the main stay GT2 with the 70t hand out motors. We will also have a Sportsman GT2 class 70t/80t for new racers, young and old, who want to join the fun.
Track open for practice all day Friday June 1st(1:00PM - 7:00PM)
Saturday June 2nd Schedule: Morning Practice (8:30AM - 10:30AM)
Qualifications Start at 11:00 Noon
Three 4 Minute Heats with 8 Minute Mains
Race Location:
High Speed Hobbies China Grove, NC
2510 Highway 29
China Grove, NC 28023
US
(704) 855-2940
Sponsors:
High Speed Hobbies
Paint by K Dub
Race Fees:
First Class: $20.00
All other classes Classes $10.00
Use of Handout Stock Motor Included
Sportsman: $10.00 (Handout Motor not required)
Friday Practice: $5.00 per Racer, All Day
ILap Transponder Rental: $5 with harness (Available for purchase as well)
RACING CLASSES
GT2 - LMP2 - CanAm1 - Sportsman GT2 70 or 80 turn PN motor.
SEE RULES BELOW:
Grand Touring Class GT2
Chassis: Any 1/28th scale 2WD chassis.
Track Width: 80mm max
Wheel Base: 86-102mm
Body: Kyosho ASC, White Body or equivalent (TRP, Iwaver, X-Mod, etc...) hard plastic bodies allowed, excluding LM-LeMans Prototype bodies (See LMP class list) or Can-Am/Pan-type bodies. No thin shell Lexan/polycarbonate bodies allowed. Bodies may be altered for wheelbase but a maximum wheel opening of 31mm measured horizontally must be maintained. Wheel wells may be altered for tire clearance but the body must cover the tire completely when viewed from above. Cabin window must be retained but may be lightened internally, polycarbonate (Lexan) windows allowed. Headlight buckets may be removed but lenses or covers must be retained. Taillight lenses and housings may be removed. The rear fascia or bumper maybe cut but no higher than 18mm from the chassis bottom plane. Holes are legal in the remaining fascia. Small body parts such as mirrors, canards and exhaust pipes may be omitted. Front air-dams, splitters and body sides may be trimmed for track clearance.
Width: 82mm max.
Length: 200mm max
Height: 70mm max
Wing: All wings original to the body are legal. Aftermarket or non original wings must fit within the confines of main body. Wing must not extend higher than roof line relative to chassis bottom plane (excluding extensive roof scoops, for example Kyosho NSX), past widest point of body, or beyond rear of body work. This includes all parts of wing (side dams, etc...).
Electronics: Stock Mini Z board, Fets unlimited.
Batteries: 4 x AAA NiCad, NiMh or Alkaline (Lithium based batteries NOT allowed)
Wheels: Any Mini-Z type wheels, plastic or aluminum.
Front: 9 x 22mm max
Rear: 11 x 22mm max
Tires: Any rubber Mini-Z type tires (no foam).
Min Weight: 175g with transponder.
Motor: 70 turn hand out(hand out motors will be returned to race director at end of event.)
Le Mans Prototype Classe LMP2
Chassis: Any 1/28th scale 2WD chassis.
Track Width: 80mm max
Wheel Base: 102mm only
Body: Kyosho LM-LeMans Prototype ASC or White Body only:
Porsche 962, any version.
Mazda 787, any version.
Sauber C9, any version.
Nissan R390
Wheel wells may be altered for tire clearance but the body must cover the tire completely when viewed from above. A maximum wheel opening of 32mm measured horizontally must be maintained. Cabin windows must be retained but may be lightened internally, polycarbonate (Lexan) windows allowed. Headlight buckets may be removed but lenses or covers must be retained. Taillight lenses and housings may be removed. The rear fascia maybe cut but no higher than 18mm from the chassis bottom plane. Holes are legal in the remaining fascia. Small body parts such as mirrors, canards and exhaust pipes may be omitted. Front air-dams, splitters and body sides may be trimmed for track clearance.
Width: 82mm max.
Length: 200mm max
Height: 60mm max
Wing: All wings original to the body are legal. Aftermarket or non-original wings must fit within confines of main body. Wing must not extend higher than roof line relative to chassis bottom plane (excluding extensive roof scoops, for example Kyosho NSX), past widest point of body, or beyond rear of body work. This includes all parts of wing (side dams, etc...).
Electronics: Stock Mini Z board, Fets unlimited.
Batteries: 4 x AAA NiMh or Alkaline (Lithium based batteries NOT allowed).
Wheels: Any Mini-Z type wheels, plastic or aluminum.
Front: 9 x 22mm max
Rear: 11 x 22mm max
Tires: Kyosho LM specific tires only.
Min Weight: 175g with transponder.
Motor: 70 turn hand out(hand out motors will be returned to race director at end of event.)
Can Am Classes
Chassis: Any 1/28th scale 2WD chassis.
Track Width: 85mm max
Wheel Base: 90-106mm
Body: Atomic VDS (any version), PN Pan Car (any type), Le Mans Prototype or Can-Am style polycarbonate (Lexan) body (open or closed ****pit), Kyosho Le Mans ASC, White Body or similar.
Width: 85mm max.
Length: 200mm max
Height: 60mm max
Wing: No limitation other than must fall within Body Width-Length-Height envelope.
Electronics: Unlimited.
CanAm1
Min Weight: None.
Wheels: Any Mini-Z type wheels, plastic or aluminum.
Front: 11 x 22mm max
Rear: 11 x 22mm max
Tires: Any rubber or foam tires.
Batteries: 7.4V max. (Lithium based allowed).
Motor: Any 130 size motor. Brushless allowed.
Sportsman GT/LM
Chassis: Any 1/28th scale or similar 2WD or 4WD chassis.
Track Width: 80mm max
Wheel Base: 86-102mm
Body: Kyosho ASC, White Body or equivalent (TRP, Iwaver, X-Mod, etc...) hard plastic bodies allowed, including LM-LeMans Prototype bodies
Electronics: Stock Mini Z Board, unlimited fets.
Motor: Stock Kyosho, Stock PN 70T, or 80 turn.
Batteries: 4 x AAA NiCad, NiMh or Alkaline (Lithium based batteries NOT allowed)
Wheels: Any Mini-Z type wheels, plastic or aluminum.
Tires: Any rubber Mini-Z type tires (no foam).
Driver List:
GT2
Albert
Joshua
Wade
Chad
Hatley
Don
Daddy Rabbit
Landon
Shelby
Gavin
Terry
Robbie
Rodney
Conner
Grayson
Brandon
Mike Jones - maybe
Dustin
Mack
LMP2
Albert
Joshua
Wade
Chad
Hatley
Don
Daddy Rabbit
Shelby
Terry
Robbie
Rodney
Conner
Brandon
Grayson
Dustin
Mack
CanAm1
Albert
Joshua
Wade
Chad
Hatley
Don
Landon
Shelby
Terry
Rodney
Conner
Grayson
Mike Jones - maybe
Dustin
Sportsman GT/LM
Shayla
Drake
__________________
High Speed Hobbies
Last edited by kwsmith29; 2012.05.31 at 10:09 PM.
Reason: updated drivers
|
|
|
2012.05.15, 07:40 AM
|
#9
|
Registered User
Join Date: May 2006
Location: Kannapolis, NC
Posts: 380
|
|
|
|
2012.05.15, 08:51 AM
|
#10
|
of both Time and Space
Join Date: Apr 2008
Location: Winston-Salem, NC
Posts: 1,892
|
Quote:
Originally Posted by kwsmith29
Track open for practice all day Friday April 8th (1:00AM - 7:00PM)
Saturday April 9th Schedule: Morning Practice (8:30AM - 10:30AM)
|
April Hate I missed it!
|
|
|
2012.05.15, 09:34 AM
|
#11
|
PN Racing Team Driver
Join Date: Feb 2009
Location: Myrtle Beach, SC
Posts: 1,700
|
That's what happens when you Copy and paste. . you can count me in
__________________
PN Racing
R1Wurks
LET's Go Racing
MBMZR
DG Designs
|
|
|
2012.05.15, 10:14 AM
|
#12
|
Registered User
Join Date: May 2006
Location: Kannapolis, NC
Posts: 380
|
Sorry guys fixed...let me know if I missed anything else..
Wade
|
|
|
2012.05.15, 10:29 AM
|
#13
|
PN Racing Team Driver
Join Date: Feb 2009
Location: Myrtle Beach, SC
Posts: 1,700
|
i would change the weight to 170 as well. that is the new pn rules this year
__________________
PN Racing
R1Wurks
LET's Go Racing
MBMZR
DG Designs
|
|
|
2012.05.15, 10:30 AM
|
#14
|
pyschopath racing
Join Date: Jan 2011
Location: kannapolis,nc
Posts: 649
|
i dont think shop will be open on friday at 1 am should be 12pm to 7pm on friday
|
|
|
2012.05.15, 07:20 PM
|
#15
|
Registered User
Join Date: Sep 2011
Location: kannapolis n.c.
Posts: 203
|
My name and my bunch is not on that list u no I'll be there
__________________
MiChAeL
|
|
|
Thread Tools |
|
Display Modes |
Rate This Thread |
Linear Mode
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 01:22 PM.
|
|