I rigged up my F1 with new evo board and pot came with it except for the motor since F1 needs a different motor, now I do not have enough steering in both sides, I have put pro board on other F1 and do not have a problem, is there a way to tweak to increase the endpoints, I already adjusted the travel way higher without any luck.
Back in the day when we stuffed MR-03 boards into MR-02 chassis which uses the same big steering motors as the F1, aside from travel, the left/right balance points also needed to be super high like 90%+ to get to normal steering range.
Back in the day when we stuffed MR-03 boards into MR-02 chassis which uses the same big steering motors as the F1, aside from travel, the left/right balance points also needed to be super high like 90%+ to get to normal steering range.
I am all they way to 100%, I have another one just pro board and it has all kinds of steering and I have to turn it down.
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»