Need some help with the set up of this car? It keeps rolling over I have 40 fronts and 20 rear with hard springs up front and soft in the rear. Also is there another radio I can use with this dont really like the stock on.
Need some help with the set up of this car? It keeps rolling over I have 40 fronts and 20 rear with hard springs up front and soft in the rear. Also is there another radio I can use with this dont really like the stock on.
Hi first the radio. GoGoLap makes a RX module compatible with the ASF transmitters. Install that and you've got all the dedicated mini-z controllers available to you instead.
Have you tried the standard options to stop traction rolling?
I don't own an AMZ but assuming you can use the Mini-z AWD wheels (or there are AMZ equivalents) - get a body with wider offsets and/or a lower CoG (lexan windows may help here). Lowering the chassis too.
Gluing your tires, or trueing them may help. Some people also put a little CA glue on the sidewalls when there is too much traction (which is going to be part of your issue).
Depending on the setup options the AMZ gives you you may also be able to adjust the roll centre (theres other threads on here that explain that better than I can).
Need some help with the set up of this car? It keeps rolling over I have 40 fronts and 20 rear with hard springs up front and soft in the rear. Also is there another radio I can use with this dont really like the stock on.
Dwight. Is it rolling on corner entry or exit. Before you get off the throttle or when you pick it back up?
Hi first the radio. GoGoLap makes a RX module compatible with the ASF transmitters. Install that and you've got all the dedicated mini-z controllers available to you instead.
Do you know a resource I can order GoGoLap RX module board?
I been looking all over the place & came up only TRP Spain which is too costly in shipping.
__________________
MRX Mclaren MP-12CGT3 PN 43T LIPO: X2
MR-03 Mclaren MP-12CGT3 AT70T
PN 2.5 Mclaren MP-12CGT3 PN50T
MR-03 S2K Narrow AT60T Nihm
MR-03 BRZ Narrow PN70T Nihm
MR-03 Enzo Ferrari GT Concept Xspeed SP2012
MR-03VE 2005 NSXGT AT 12000KV w/Lipo
MR-02 Nissan R390 GT Lemans 39T PN
AMZ Benz TC 8500KV
X Power IDT Ultra 5600KV Audi
X Power IMT Ultra 6800KV M3
MB-010 FT86 Comic Racer 39T PN
MF-015 Mclaren MP4-25 50T w/Lipo PN
MR-01 Mugen NSX-GT 02 X Speed Retired
dNaNo FX-101MM T2 XANAVI NISMO GT-R
***************************************
MAJ'S HOBBY SHOP " A Place To Escape from Reality"! TD
214 State St. Suite 209
Hackensack, NJ 07601. 201-820-1347
LIVE Mini-Z RACING EVERY Fri at 7 PM.
Outdoor Saturday On Road Racing 1/8GTVE,1/10TC&USGT
Do you know a resource I can order GoGoLap RX module board?
I been looking all over the place & came up only TRP Spain which is too costly in shipping.
That's where I'd go for it. I'm in Australia. Sadly for me shipping from there is 'normal' as opposed to 'expensive'.
I'm waiting on the radio to confirm this. Found the information on rctech.net. according to futaba there frequency is fhss and that's the same as the AMZ radio.
I am a GoGoLap dealer and will be placing an order shortly as I'm out of the amazing lightweight Nissan JGTC body that they make. I know that Philip from PN is also a dealer, so he may order too, who knows? Maybe. Anyway, Canadian dollar is sucking still, so all Americans when they buy from me are getting a 10% discount minimum just by being able to buy in USD and converting to CDN.
__________________
Mini-Car Club of Canada (MC3)
Premier Mini-Z Race Track & dNaNo Sales in Toronto, ON Canada www minicarclubofcanada com
I am a GoGoLap dealer and will be placing an order shortly as I'm out of the amazing lightweight Nissan JGTC body that they make. I know that Philip from PN is also a dealer, so he may order too, who knows? Maybe. Anyway, Canadian dollar is sucking still, so all Americans when they buy from me are getting a 10% discount minimum just by being able to buy in USD and converting to CDN.
I am a GoGoLap dealer and will be placing an order shortly as I'm out of the amazing lightweight Nissan JGTC body that they make. I know that Philip from PN is also a dealer, so he may order too, who knows? Maybe. Anyway, Canadian dollar is sucking still, so all Americans when they buy from me are getting a 10% discount minimum just by being able to buy in USD and converting to CDN.
How much, those people in spain are asking 70+ dollars. A hobby shop in Malaysia i found wants 66 Dollars shipped to my house which i think is still outrageous.
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»