2012.08.16, 05:25 PM
|
#46
|
Registered User
Join Date: Mar 2006
Location: Kuala Lumpur, Malaysia
Posts: 659
|
Quote:
Originally Posted by KO PROPO Staff
If you have performed the Adjust TH (enter the function, pull full throttle, push full brake, back to neutral) and press and hold the enter button. Compete will be shown and you will be taken back to the System Menu.
If you have done this correctly and still have problems, then the throttle pot might be damaged and you should send it back to where you purchased it to get fixed or replaced.
|
Yes, i've did all that and still having problem...OMG have to send it back to Japan then . is this a rare case or happen to other ppl before?
__________________
Mini-Z AWD 2.4Ghz 94mm
Mini-Z AWD DWS PN A-Arm 2.4Ghz MR03 board 98mm
Mini-Z MR-02 2.4Ghz
Mini-Z MR-03
FX-101 Dnano 360 Modena
|
|
|
2012.08.16, 05:45 PM
|
#47
|
Registered User
Join Date: May 2008
Location: Long Beach, CA
Posts: 108
|
This is why you should purchase from your local shops (distributor) in case there is a problem.
It is rare, but can happen as nothing is perfect.
|
|
|
2012.08.16, 06:07 PM
|
#48
|
Registered User
Join Date: Mar 2006
Location: Kuala Lumpur, Malaysia
Posts: 659
|
Quote:
Originally Posted by KO PROPO Staff
This is why you should purchase from your local shops (distributor) in case there is a problem.
It is rare, but can happen as nothing is perfect.
|
thanks for ur reply, lesson learned
__________________
Mini-Z AWD 2.4Ghz 94mm
Mini-Z AWD DWS PN A-Arm 2.4Ghz MR03 board 98mm
Mini-Z MR-02 2.4Ghz
Mini-Z MR-03
FX-101 Dnano 360 Modena
|
|
|
2012.08.31, 10:59 PM
|
#49
|
Registered User
Join Date: May 2011
Location: Hong Kong
Posts: 21
|
A friend of mine got the exact same prob. He has it returned to local reseller and had a full refund. It's a faulty Master Unit.
|
|
|
2012.08.31, 11:02 PM
|
#50
|
Registered User
Join Date: May 2011
Location: Hong Kong
Posts: 21
|
BTW, just ship it back to Japan for a fix. Supposedly you just need to pay the shipping fees.
|
|
|
2012.08.31, 11:39 PM
|
#51
|
Registered User
Join Date: Mar 2006
Location: Kuala Lumpur, Malaysia
Posts: 659
|
sent mine to KO Japan, they cover the shipping both ways thank god for that.
Now still in Japan and waiting for them to check whats the problem.
__________________
Mini-Z AWD 2.4Ghz 94mm
Mini-Z AWD DWS PN A-Arm 2.4Ghz MR03 board 98mm
Mini-Z MR-02 2.4Ghz
Mini-Z MR-03
FX-101 Dnano 360 Modena
|
|
|
2012.09.02, 12:33 AM
|
#52
|
Registered User
Join Date: May 2011
Location: Hong Kong
Posts: 21
|
good to hear that. By the way, the problem seems not to be uncommon. In the track here, 3 out of 8 EX-1s have the same issue. It turns out that it's the grip handle that causes it and the Master Unit is fine, as at least in our 3 cases. And we notice that the packing of the grip unit is bad with inadequate protection, which might be the reason for broken grip unit during shipping.
Anyway, we have explained this to the local reseller in Hong Kong and ask them to reflect the situation to KO.
|
|
|
2012.10.06, 03:02 AM
|
#53
|
Registered User
Join Date: Nov 2006
Location: toronto
Posts: 100
|
I have a question about the throttle high point, for the standard 1/10 radio using mini z module, the throttle high point is set at 60%( according to KO web site) then what is the throttle high point for KIY EX1 ASF for Mini Z, does the default setting take into account that it is for Mini Z (since it is specially made for mini z only) and using the default setting (which is 100) will use the full range of ESC on the Mini Z board ?
|
|
|
2012.10.06, 03:11 AM
|
#54
|
Registered User
Join Date: Mar 2006
Location: Kuala Lumpur, Malaysia
Posts: 659
|
Quote:
Originally Posted by josyskunk
I have a question about the throttle high point, for the standard 1/10 radio using mini z module, the throttle high point is set at 60%( according to KO web site) then what is the throttle high point for KIY EX1 ASF for Mini Z, does the default setting take into account that it is for Mini Z (since it is specially made for mini z only) and using the default setting (which is 100) will use the full range of ESC on the Mini Z board ?
|
i put mine at 100...u can try pulling full throttle then hear the RPM....will peak at 100...
__________________
Mini-Z AWD 2.4Ghz 94mm
Mini-Z AWD DWS PN A-Arm 2.4Ghz MR03 board 98mm
Mini-Z MR-02 2.4Ghz
Mini-Z MR-03
FX-101 Dnano 360 Modena
|
|
|
2012.10.14, 12:23 PM
|
#55
|
Mini-Z Norway
Join Date: Sep 2003
Posts: 457
|
Quote:
Originally Posted by KO PROPO Staff
Voltage does not make a difference as the max output for FHSS is 100mW and as stated 3-3.3V is the operating voltage for a 2.4GHz chip set. 100mW is a FCC regulation for max output.
|
The manual says: Use batteries which have adequate remaining capacity. Weak
batteries mean lower transmitting power and may result in
malfunctions.
Does it support unregulated 7,4 lipo?
Does it have the same output power as the Euros?
|
|
|
2012.10.14, 11:06 PM
|
#56
|
Registered User
Join Date: Jul 2010
Posts: 294
|
no rune. i think KIY has more power than euros right now. with Greece crisis and all.lol.
and i think it's the same between KIY and eurus.
|
|
|
2012.10.15, 02:07 AM
|
#57
|
Mini-Z Norway
Join Date: Sep 2003
Posts: 457
|
Quote:
Originally Posted by unearthed name
no rune. i think KIY has more power than euros right now. with Greece crisis and all.lol.
and i think it's the same between KIY and eurus.
|
Haha
Not easy to write the correct name...
But what you say are that the EX10 Eurus has lower transmitting power than the new EX1.
Can Ko Propo confirm this?
|
|
|
2012.10.16, 05:58 PM
|
#58
|
Registered User
Join Date: May 2008
Location: Long Beach, CA
Posts: 108
|
Quote:
Originally Posted by Rune
The manual says: Use batteries which have adequate remaining capacity. Weak
batteries mean lower transmitting power and may result in
malfunctions.
Does it support unregulated 7,4 lipo?
Does it have the same output power as the Euros?
|
You can use a 2S Lipo for the EX-1 KIY, just make sure you set it to the correct battery mode being used so that you get the correct low voltage warning.
The output is the same as the Eurus due to FCC and international frequency broadcasting regulations.
|
|
|
2012.10.17, 07:56 AM
|
#59
|
Mini-Z Norway
Join Date: Sep 2003
Posts: 457
|
Thanks a lot.
Any info on when the lipo pack are scheduled for release?
|
|
|
2012.10.27, 06:58 AM
|
#60
|
DJ Eddie!
Join Date: Jan 2010
Location: Scary North East
Posts: 1,166
|
Quote:
Originally Posted by ub0211042
Hi guys,
I bought the KIY from Japan few days back, and i've encountered some BIG problem. My car runs by itself...at first i taught it was my car problem. It wasn't, its the KIY.
In the monitor view, u can actually see what each channel are doing and in my case...the TH bar flickers left and right without me holding the TH trigger.
I've tried factory reset, adjust TH, adjust trim...i works only for a while and the problem will happen again. I tried swap with my friend's Hand unit and it works flawlessly.
Hope someone can shed some light on this, thanks!
http://www.youtube.com/watch?v=G1nLZScXfpI
|
KO Propo America took care of it under warranty in faulty Trigger repair service & Great turnaround time also.
__________________
MRX Mclaren MP-12CGT3 PN 43T LIPO: X2
MR-03 Mclaren MP-12CGT3 AT70T
PN 2.5 Mclaren MP-12CGT3 PN50T
MR-03 S2K Narrow AT60T Nihm
MR-03 BRZ Narrow PN70T Nihm
MR-03 Enzo Ferrari GT Concept Xspeed SP2012
MR-03VE 2005 NSXGT AT 12000KV w/Lipo
MR-02 Nissan R390 GT Lemans 39T PN
AMZ Benz TC 8500KV
X Power IDT Ultra 5600KV Audi
X Power IMT Ultra 6800KV M3
MB-010 FT86 Comic Racer 39T PN
MF-015 Mclaren MP4-25 50T w/Lipo PN
MR-01 Mugen NSX-GT 02 X Speed Retired
dNaNo FX-101MM T2 XANAVI NISMO GT-R
***************************************
MAJ'S HOBBY SHOP " A Place To Escape from Reality"! TD
214 State St. Suite 209
Hackensack, NJ 07601. 201-820-1347
LIVE Mini-Z RACING EVERY Fri at 7 PM.
Outdoor Saturday On Road Racing 1/8GTVE,1/10TC&USGT
DG DESIGNS
|
|
|
Thread Tools |
|
Display Modes |
Rate This Thread |
Linear Mode
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 08:32 PM.
|
|