Mini-Z, Kyosho Mini-Z Racer, MR-03, MR-02, MA-010, Forums, News, Pictures, Parts, and Shop - Mini-ZRacer.com
Forums, Mini-Z, MiniZ, Kyosho Mini-Z, Kyosho MiniZ, Kyosho Mini-Z Racer
Mini-Z Hop-Ups, Mini-Z Parts, MiniZ Hop-Ups, MiniZ Parts, Kyosho Mini-Z Hop-Ups, Kyosho Mini-Z Parts, Kyosho MiniZ Hop-Ups, Kyosho MiniZ Parts, Kyosho Mini-Z Racer Hop-Ups, Racer Kyosho Mini-Z Parts
Old 2012.03.29, 08:04 PM   #1
blaze0303
Guest
 
Posts: n/a
Blaze0303: My mini-z and 1/10th goodness!

Yokomo D-Max my pride and joy 1/10th



MR-015 (retired)


MR-02EX (old config)


Some random photos of my equipment




Last edited by blaze0303; 2012.04.03 at 07:30 AM. Reason: Added more photos!
  Reply With Quote
Old 2012.04.03, 07:23 AM   #2
blaze0303
Guest
 
Posts: n/a
Even MOAR!

Current setups - The pink one is the MR-02EX with alot of R246 hop-ups. Running 102mm alum motor mount, R246 BBS motor, Kyosho ball diff, Kyosho front springs (hard), Kyosho knuckles, R246 ball bearings, R246 roll and oil shock, Kyosho carbon t-plate (hard) and a 9T pinion.

My old MR-015 was swapped into the black MR-02 chassis and has the following hop-ups. Kyosho medium front springs, Kyosho carbon t-plate (medium), Kyosho oil shock and a 9T pinion.

Both cars are using narrow Kyosho 40's in front and wide Kyosho 20's in the rear.





Last edited by blaze0303; 2012.04.03 at 07:45 AM.
  Reply With Quote
Old 2012.04.03, 06:51 PM   #3
blaze0303
Guest
 
Posts: n/a
I'm looking for feedback espcially on the pink 02 from some of the experienced guys on this forum. I run on hard carpet, so any tips on making my setup faster would be highly appciated.
  Reply With Quote
Old 2012.04.03, 11:25 PM   #4
imxlr8ed
Registered User
 
imxlr8ed's Avatar
 
Join Date: Sep 2004
Location: Reading Pa.
Posts: 4,124
First off, I'd trim those motor wires back a bit, looks like they may cause some unwanted rubbing. Might want to lose the big yellow resistors too, pointless IMO.

Your cars look great though!
__________________
My Online Design Studio and Shop!

http://www.shapeways.com/shops/UID

http://www.howfastareyou.com

SUPPORT LBR!!!
(Local Basement Racing)

Last edited by imxlr8ed; 2012.04.03 at 11:27 PM.
imxlr8ed is offline   Reply With Quote
Old 2012.04.04, 12:49 AM   #5
blaze0303
Guest
 
Posts: n/a
Quote:
Originally Posted by imxlr8ed View Post
First off, I'd trim those motor wires back a bit, looks like they may cause some unwanted rubbing. Might want to lose the big yellow resistors too, pointless IMO.

Your cars look great though!
Thanks a lot, I was actually thinking about ditching the resistors, and you just solidified that for me, they shall be gone tonight. If my soldering skills feel up to par i'll also shorten the wires. Thanks for the advice.

EDIT - I took your advice and it turned out great!







Last edited by blaze0303; 2012.04.04 at 07:29 AM.
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: RTR Kyosho 1/10th rally car, Airtronics MXA ChattavegasSE Mini-Z Marketplace 9 2008.05.29 10:33 PM
Chicago Mini Z/Micro Races HauntedMyst Tracks and GTGs 2 2004.01.22 08:24 PM
Noble Pieze Prize For Mini Z Breakthroughs NOMOTORLIMIT Miscellaneous Discussion 0 2002.12.07 12:55 PM
My rookie review with my first mini F1 West.F1 Mini-Z F1 MF-010, MF-015 5 2002.06.17 10:28 PM
Installing 1/10th Scale Electronics in the Mini Z Racer CTRallyRacer Parts and Hop-ups 2 2002.03.04 07:55 AM


All times are GMT -5. The time now is 01:28 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2011 Mini-ZRacer.com
Mini Inferno Sale - Up to $85 Instant Savings!
Micro-T Hop-Ups
RC18R, M18, Micro RS4, Mini-LST, TamTech-Gear, Minizilla, RC18T, RC18B, RC18MT
shop.tinyrc.com Products

more»
Tiny RC Community News
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated. The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year.  Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All! Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»
Mini-Z, Mini-Z Racer, MR-02, MA-010
M18, M18T, RC18T, Mini-LST, Mini-T, Micro RS4, XRay, 1/18, 18th scale
XMODS, XMOD, Micro Flight, ZipZaps, ZipZaps SE, Bit Char-G, MicroSizers, TTTT, Plantraco Desktop Rover, SuperSlicks, Digi Q
Mini Inferno, Mini Inferno ST, half EIGHT, 1/16, 16th scale
Epoch, Indoor Racer, 1/43, 43rd scale
E-Savage, eSavage, eZilla, e-Zilla, HPI
Robots, Bots, Bipeds, Wheeled, Manoi, Roomba, NXT, Lego, Hacking
Crawling, Crawlers, Micro, RC, Losi Mini-Rock Crawler, Duratrax Cliff Climber
Kyosho Minium, Caliber 120, Minium Forums
Mini-Z Hop-Ups, Mini-Z Parts, Mini Inferno Hop-Ups, Mini Inferno Parts, M18 Hop-Ups, M18 Parts