2010.06.30, 07:09 AM
|
#76
|
DJ Eddie!
Join Date: Jan 2010
Location: Scary North East
Posts: 1,166
|
Quote:
Originally Posted by EMU
Its the screw right behind of the tie rod. The screw provided is an alternate size head, so I use a different counter-sunk philips so if I need to remove the bumper, I dont have to pull a different tool out.
|
TKs Eugene, I see where it would be mounted. Pretty much for now I just have to use alternative front end protection until some ETA information will be available at shop.
__________________
MRX Mclaren MP-12CGT3 PN 43T LIPO: X2
MR-03 Mclaren MP-12CGT3 AT70T
PN 2.5 Mclaren MP-12CGT3 PN50T
MR-03 S2K Narrow AT60T Nihm
MR-03 BRZ Narrow PN70T Nihm
MR-03 Enzo Ferrari GT Concept Xspeed SP2012
MR-03VE 2005 NSXGT AT 12000KV w/Lipo
MR-02 Nissan R390 GT Lemans 39T PN
AMZ Benz TC 8500KV
X Power IDT Ultra 5600KV Audi
X Power IMT Ultra 6800KV M3
MB-010 FT86 Comic Racer 39T PN
MF-015 Mclaren MP4-25 50T w/Lipo PN
MR-01 Mugen NSX-GT 02 X Speed Retired
dNaNo FX-101MM T2 XANAVI NISMO GT-R
***************************************
MAJ'S HOBBY SHOP " A Place To Escape from Reality"! TD
214 State St. Suite 209
Hackensack, NJ 07601. 201-820-1347
LIVE Mini-Z RACING EVERY Fri at 7 PM.
Outdoor Saturday On Road Racing 1/8GTVE,1/10TC&USGT
DG DESIGNS
|
|
|
2010.06.30, 08:49 AM
|
#77
|
tire schredder
Join Date: Sep 2008
Posts: 864
|
They will be ready to ship tomorrow! They tend to go quick so get your order in!
__________________
MantisWorx
www.rcshox.com
professional RC products
Marcus Williams
|
|
|
2010.06.30, 11:40 AM
|
#78
|
DJ Eddie!
Join Date: Jan 2010
Location: Scary North East
Posts: 1,166
|
Quote:
Originally Posted by MantisMMA
They will be ready to ship tomorrow! They tend to go quick so get your order in!
|
YEA, So hopefully I will get your fine works in few days!
__________________
MRX Mclaren MP-12CGT3 PN 43T LIPO: X2
MR-03 Mclaren MP-12CGT3 AT70T
PN 2.5 Mclaren MP-12CGT3 PN50T
MR-03 S2K Narrow AT60T Nihm
MR-03 BRZ Narrow PN70T Nihm
MR-03 Enzo Ferrari GT Concept Xspeed SP2012
MR-03VE 2005 NSXGT AT 12000KV w/Lipo
MR-02 Nissan R390 GT Lemans 39T PN
AMZ Benz TC 8500KV
X Power IDT Ultra 5600KV Audi
X Power IMT Ultra 6800KV M3
MB-010 FT86 Comic Racer 39T PN
MF-015 Mclaren MP4-25 50T w/Lipo PN
MR-01 Mugen NSX-GT 02 X Speed Retired
dNaNo FX-101MM T2 XANAVI NISMO GT-R
***************************************
MAJ'S HOBBY SHOP " A Place To Escape from Reality"! TD
214 State St. Suite 209
Hackensack, NJ 07601. 201-820-1347
LIVE Mini-Z RACING EVERY Fri at 7 PM.
Outdoor Saturday On Road Racing 1/8GTVE,1/10TC&USGT
DG DESIGNS
|
|
|
2010.07.04, 04:19 PM
|
#79
|
tire schredder
Join Date: Sep 2008
Posts: 864
|
little bit of a revision on the V2 wing, and this is my LH replica...finally!
__________________
MantisWorx
www.rcshox.com
professional RC products
Marcus Williams
|
|
|
2010.07.07, 07:14 PM
|
#80
|
DJ Eddie!
Join Date: Jan 2010
Location: Scary North East
Posts: 1,166
|
Quote:
Originally Posted by MantisMMA
little bit of a revision on the V2 wing, and this is my LH replica...finally!
|
Looks great and still waiting. Hopefully V2 will arrive any day now.
__________________
MRX Mclaren MP-12CGT3 PN 43T LIPO: X2
MR-03 Mclaren MP-12CGT3 AT70T
PN 2.5 Mclaren MP-12CGT3 PN50T
MR-03 S2K Narrow AT60T Nihm
MR-03 BRZ Narrow PN70T Nihm
MR-03 Enzo Ferrari GT Concept Xspeed SP2012
MR-03VE 2005 NSXGT AT 12000KV w/Lipo
MR-02 Nissan R390 GT Lemans 39T PN
AMZ Benz TC 8500KV
X Power IDT Ultra 5600KV Audi
X Power IMT Ultra 6800KV M3
MB-010 FT86 Comic Racer 39T PN
MF-015 Mclaren MP4-25 50T w/Lipo PN
MR-01 Mugen NSX-GT 02 X Speed Retired
dNaNo FX-101MM T2 XANAVI NISMO GT-R
***************************************
MAJ'S HOBBY SHOP " A Place To Escape from Reality"! TD
214 State St. Suite 209
Hackensack, NJ 07601. 201-820-1347
LIVE Mini-Z RACING EVERY Fri at 7 PM.
Outdoor Saturday On Road Racing 1/8GTVE,1/10TC&USGT
DG DESIGNS
|
|
|
2010.07.12, 08:32 AM
|
#81
|
DJ Eddie!
Join Date: Jan 2010
Location: Scary North East
Posts: 1,166
|
Quote:
Originally Posted by machgo5go
YEA, So hopefully I will get your fine works in few days!
|
Finally got it but decide on your V1 instead in more durability then V2 without making a mess in gluing.
Got to give you credit that it is strong and nothing broken in front end at brutal races.
Now stock rear end pod is cracked so awaits for PN Rear Pod so I can try out your T- plate.
__________________
MRX Mclaren MP-12CGT3 PN 43T LIPO: X2
MR-03 Mclaren MP-12CGT3 AT70T
PN 2.5 Mclaren MP-12CGT3 PN50T
MR-03 S2K Narrow AT60T Nihm
MR-03 BRZ Narrow PN70T Nihm
MR-03 Enzo Ferrari GT Concept Xspeed SP2012
MR-03VE 2005 NSXGT AT 12000KV w/Lipo
MR-02 Nissan R390 GT Lemans 39T PN
AMZ Benz TC 8500KV
X Power IDT Ultra 5600KV Audi
X Power IMT Ultra 6800KV M3
MB-010 FT86 Comic Racer 39T PN
MF-015 Mclaren MP4-25 50T w/Lipo PN
MR-01 Mugen NSX-GT 02 X Speed Retired
dNaNo FX-101MM T2 XANAVI NISMO GT-R
***************************************
MAJ'S HOBBY SHOP " A Place To Escape from Reality"! TD
214 State St. Suite 209
Hackensack, NJ 07601. 201-820-1347
LIVE Mini-Z RACING EVERY Fri at 7 PM.
Outdoor Saturday On Road Racing 1/8GTVE,1/10TC&USGT
DG DESIGNS
|
|
|
2010.10.20, 10:20 PM
|
#82
|
Moderator
Join Date: Sep 2002
Location: Washington, DC
Posts: 35,480
|
i finally had the opportunity to order the front wing and choose the v1 as it just looks more durable.
i have to ask, why include hex head screws that are not a common size to what other manufacturers are using? i went to install my wing tonight only to realize the screws are too small for the standard 1.5mm and too big for the .9mm hex head drivers. these are the two most common sizes used by both pn and atomic. i literally do not have any other hex head drivers.
i had a major complaint about pn releasing kits without tools to install them when they were not standard size. i find myself now in the same position with this front wing.
what size driver is needed? perhaps this should be included in the 'needed to install' portion of the instructions. i'm racing f1 in the als charity race this saturday and now i have to wait and hope someone at the race has the right driver.
props for choosing hex head screws though
Last edited by arch2b; 2010.10.20 at 10:47 PM.
|
|
|
2010.10.20, 10:38 PM
|
#83
|
Registered User
Join Date: Sep 2010
Posts: 11
|
Wallmart has these keychain like things, its something like 2 for $3 and together you have most hex sizes.
|
|
|
2010.10.20, 10:45 PM
|
#84
|
EMUracing
Join Date: Oct 2004
Location: NYC
Posts: 7,417
|
I luckily have one of the appropriate sized hex keys on my leatherman. It is an imperial size, although the specific size escapes my memory at the moment.
__________________
EMUracing
Micro RC Syndicate /DG Designs /GSR /Reflex Racing /Fast By Faqish /MurderTown Racing
|
|
|
2010.10.20, 10:49 PM
|
#85
|
Team Reflex
Join Date: May 2007
Location: northern va
Posts: 739
|
Its either .50" or 1/16".
__________________
Matt Ward
Reflex Racing Mantis Worx DG-Designs Psycho Cells
|
|
|
2010.10.21, 12:05 AM
|
#86
|
tire schredder
Join Date: Sep 2008
Posts: 864
|
the proper size is .050 non metric. i use these screws because they are 2-56 which is slightly bigger/stronger than the std 2mm screws i can only get this size in aluminum SHCS. you can use std self thread screws until you find the proper size alen wrench if you like. sorry for your confusion.
__________________
MantisWorx
www.rcshox.com
professional RC products
Marcus Williams
|
|
|
2010.10.21, 01:42 PM
|
#87
|
Moderator
Join Date: Sep 2002
Location: Washington, DC
Posts: 35,480
|
i'm sure someone at the event will have a wrench unless i can find one at a hardware store friday.
if i could suggest, adding that tid bit of information to the product information would be very helpful. as my experience with the PN product, it was frustrating to finally have been able to order a highly praised product only to realize upon arrival that crucial information regarding it's assembly simply is not provided anywhere. its not much fun staring at a bunch of bits on the table with nothing to assemble them with. the bits look good though.
tools required is always helpful information to provide
Last edited by arch2b; 2010.10.21 at 01:46 PM.
|
|
|
2010.10.21, 02:43 PM
|
#88
|
Team Reflex
Join Date: May 2007
Location: northern va
Posts: 739
|
Ray, I'll bring a wrench with me you can use.
__________________
Matt Ward
Reflex Racing Mantis Worx DG-Designs Psycho Cells
|
|
|
2010.10.21, 09:17 PM
|
#89
|
Moderator
Join Date: Sep 2002
Location: Washington, DC
Posts: 35,480
|
Quote:
Originally Posted by VAzRACER
Ray, I'll bring a wrench with me you can use.
|
thanks matt. i tore through my entire box and did find a small wrench that fit! if i recall, it came from an alloy pinion set of some kind.
|
|
|
2010.11.21, 06:34 PM
|
#90
|
tire schredder
Join Date: Sep 2008
Posts: 864
|
i am still here guys, been going through a bunch of crap with this hobby shop thing (which is not working out as planned) and the lack of anywhere to test anything in houston. i have been talking with EMU and Matt and i am going to come up with something sick for next year since apperently the floodgates have been opened up to do pretty much whatever we want to the cars!
__________________
MantisWorx
www.rcshox.com
professional RC products
Marcus Williams
|
|
|
Thread Tools |
|
Display Modes |
Rate This Thread |
Linear Mode
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 09:16 PM.
|
|