"akura2"...... I'm a newbie to RC and Mini-z. I purchased a Jomurema JR128-R01 RTR and I wanted to use the Audi R8 LM Body. This thread is prefect for what I want to do. Your photos are giving me hope. Thank you "herman" for sharing your body clip relocation guides.
"akura2"...... I'm a newbie to RC and Mini-z. I purchased a Jomurema JR128-R01 RTR and I wanted to use the Audi R8 LM Body. This thread is prefect for what I want to do. Your photos are giving me hope. Thank you "herman" for sharing your body clip relocation guides.
Glad we could help!!
__________________
"He who KNOWS he's stupid is actually kinda smart"
You would be better off running +2 front and +3 rears on this body or even +1 and +2's. It provides a much more balanced steering feel and improved turn in under power. As far as AWD offsets go I have no idea but it should be listed in the included Kyosho material.
AWD would be +3.5 narrow in front, with +3 wide rear.
If you have an 020 with wide front end, then you would want to use +2mm in the front.
The track width of the 010 is the same as the narrow MR03, and wide 020 is the same as wide 03.
It creates a little confusion at first, but narrow to wide is a difference in total of 5mm, or 2.5mm each wheel.
With 3.5mm being the widest narrow offset available, that is the limitation. So this would equate to a 1mm with the wide kit.
I might opt for 2mm rear wheels if using a narrow front end for better balance.
__________________
EMUracing Micro RC Syndicate /DG Designs /GSR /Reflex Racing /Fast By Faqish /MurderTown Racing
For MR03 Wide setting:
Front N: +1/+2/+3
Rear W: +2/+2.5/+3
For AWD (from mini-z guide site - needs confirmation)
Front N: +4.5
Rear W: +2.2
Pretty cool that you can put on a wide range of offsets on the mr03... guess it's personal preference, as long as it's within the racing rules of your club... I'd like them just within the fenders for extra protection...
At +3 front and rear, I think this is kyosho's widest body. Which makes it a great racing body (rules permitting)
Do the old and new r8 have the same offset? How about the r8 made by GL racing?
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»