Mini-Z, Kyosho Mini-Z Racer, MR-03, MR-02, MA-010, Forums, News, Pictures, Parts, and Shop - Mini-ZRacer.com
Forums, Mini-Z, MiniZ, Kyosho Mini-Z, Kyosho MiniZ, Kyosho Mini-Z Racer
Mini-Z Hop-Ups, Mini-Z Parts, MiniZ Hop-Ups, MiniZ Parts, Kyosho Mini-Z Hop-Ups, Kyosho Mini-Z Parts, Kyosho MiniZ Hop-Ups, Kyosho MiniZ Parts, Kyosho Mini-Z Racer Hop-Ups, Racer Kyosho Mini-Z Parts
Old 2010.07.13, 09:22 PM   #16
machgo5go
DJ Eddie!
 
machgo5go's Avatar
 
Join Date: Jan 2010
Location: Scary North East
Posts: 1,166
Question on the proper spacers that came with the T-Plate.
OEM Kyosho plastic on have one end shave down in less thickness in order to be flush under the F1's battery tray.
The Carbon 2 pieces is all equal thickness so when I install it, T-plate never be flush along the Batteries Tray's bottom.
Am I missing something in the idea of these 2 spacers?
__________________
MRX Mclaren MP-12CGT3 PN 43T LIPO: X2
MR-03 Mclaren MP-12CGT3 AT70T
PN 2.5 Mclaren MP-12CGT3 PN50T
MR-03 S2K Narrow AT60T Nihm
MR-03 BRZ Narrow PN70T Nihm
MR-03 Enzo Ferrari GT Concept Xspeed SP2012
MR-03VE 2005 NSXGT AT 12000KV w/Lipo
MR-02 Nissan R390 GT Lemans 39T PN
AMZ Benz TC 8500KV
X Power IDT Ultra 5600KV Audi
X Power IMT Ultra 6800KV M3
MB-010 FT86 Comic Racer 39T PN
MF-015 Mclaren MP4-25 50T w/Lipo PN
MR-01 Mugen NSX-GT 02 X Speed Retired
dNaNo FX-101MM T2 XANAVI NISMO GT-R

***************************************
MAJ'S HOBBY SHOP " A Place To Escape from Reality"! TD
214 State St. Suite 209
Hackensack, NJ 07601. 201-820-1347
LIVE Mini-Z RACING EVERY Fri at 7 PM.
Outdoor Saturday On Road Racing 1/8GTVE,1/10TC&USGT


DG DESIGNS

machgo5go is offline   Reply With Quote
Old 2010.07.13, 09:30 PM   #17
MantisMMA
tire schredder
 
MantisMMA's Avatar
 
Join Date: Sep 2008
Posts: 864
Not sure if I understand your question but you no longer use the battery tray, the t plate takes it place you can either use the kyosho spacers or the mantisworx spacers but not both. The MW spacers are desugned to be used with the MW barge board. You can trim off the OEM barge board if you use the MW spacers, they are thinner than the kyosho spacers therefore eliminating the spacer that is normally used on the motor mount.
__________________
MantisWorx
www.rcshox.com
professional RC products

Marcus Williams
MantisMMA is offline   Reply With Quote
Old 2010.07.13, 10:03 PM   #18
machgo5go
DJ Eddie!
 
machgo5go's Avatar
 
Join Date: Jan 2010
Location: Scary North East
Posts: 1,166
Quote:
Originally Posted by MantisMMA View Post
Not sure if I understand your question but you no longer use the battery tray, the t plate takes it place you can either use the kyosho spacers or the mantisworx spacers but not both. The MW spacers are desugned to be used with the MW barge board. You can trim off the OEM barge board if you use the MW spacers, they are thinner than the kyosho spacers therefore eliminating the spacer that is normally used on the motor mount.
Thank you, you hit the magic work" Trim off"! The OEM front side wing's barge board tabs were there which is why I could not understand how your carbon spacers can be fit it flush under the T-plates and now I know. Now I can feel PN rear pods springs is raised higher to be more taught onto the chassis. Can't wait to see how it handle on track esp. now protected along with your V1 Front wing!
IMO, I think it maybe good idea to include some kind of simple installation instructions in your products since you do make great product from a one man band operation!
__________________
MRX Mclaren MP-12CGT3 PN 43T LIPO: X2
MR-03 Mclaren MP-12CGT3 AT70T
PN 2.5 Mclaren MP-12CGT3 PN50T
MR-03 S2K Narrow AT60T Nihm
MR-03 BRZ Narrow PN70T Nihm
MR-03 Enzo Ferrari GT Concept Xspeed SP2012
MR-03VE 2005 NSXGT AT 12000KV w/Lipo
MR-02 Nissan R390 GT Lemans 39T PN
AMZ Benz TC 8500KV
X Power IDT Ultra 5600KV Audi
X Power IMT Ultra 6800KV M3
MB-010 FT86 Comic Racer 39T PN
MF-015 Mclaren MP4-25 50T w/Lipo PN
MR-01 Mugen NSX-GT 02 X Speed Retired
dNaNo FX-101MM T2 XANAVI NISMO GT-R

***************************************
MAJ'S HOBBY SHOP " A Place To Escape from Reality"! TD
214 State St. Suite 209
Hackensack, NJ 07601. 201-820-1347
LIVE Mini-Z RACING EVERY Fri at 7 PM.
Outdoor Saturday On Road Racing 1/8GTVE,1/10TC&USGT


DG DESIGNS


Last edited by machgo5go; 2010.07.13 at 10:07 PM.
machgo5go is offline   Reply With Quote
Old 2010.07.13, 10:19 PM   #19
MantisMMA
tire schredder
 
MantisMMA's Avatar
 
Join Date: Sep 2008
Posts: 864
Not sure what your setup is but you don't need the side springs. Most of us are simply using the kyosho DDS and the t plate. I think if you use the side springs it will be too stiff and may chatter. I have even used just a shock and t plate and it worked good. It is my intention to do some write ups on I stallation but I just get overwhelmed with stuff to design /make on a daily basis! I am gonna make my team drivers do write ups for me!
__________________
MantisWorx
www.rcshox.com
professional RC products

Marcus Williams
MantisMMA is offline   Reply With Quote
Old 2010.07.13, 10:46 PM   #20
machgo5go
DJ Eddie!
 
machgo5go's Avatar
 
Join Date: Jan 2010
Location: Scary North East
Posts: 1,166
Quote:
Originally Posted by MantisMMA View Post
Not sure what your setup is but you don't need the side springs. Most of us are simply using the kyosho DDS and the t plate. I think if you use the side springs it will be too stiff and may chatter. I have even used just a shock and t plate and it worked good. It is my intention to do some write ups on Installation but I just get overwhelmed with stuff to design /make on a daily basis! I am gonna make my team drivers do write ups for me!
My set up is still very primitive since I started with a raw SP1 edition chassis kit so I am still awaiting for the Kyosho DDS to arrive soon which now installed your T plate along with PN pod & a Speedy AD motor along with a Kyosho diff. I am still in question what is the best motor to run in F1 Mod in pending to try out a 43 T if I can get this chassis tuned.
__________________
MRX Mclaren MP-12CGT3 PN 43T LIPO: X2
MR-03 Mclaren MP-12CGT3 AT70T
PN 2.5 Mclaren MP-12CGT3 PN50T
MR-03 S2K Narrow AT60T Nihm
MR-03 BRZ Narrow PN70T Nihm
MR-03 Enzo Ferrari GT Concept Xspeed SP2012
MR-03VE 2005 NSXGT AT 12000KV w/Lipo
MR-02 Nissan R390 GT Lemans 39T PN
AMZ Benz TC 8500KV
X Power IDT Ultra 5600KV Audi
X Power IMT Ultra 6800KV M3
MB-010 FT86 Comic Racer 39T PN
MF-015 Mclaren MP4-25 50T w/Lipo PN
MR-01 Mugen NSX-GT 02 X Speed Retired
dNaNo FX-101MM T2 XANAVI NISMO GT-R

***************************************
MAJ'S HOBBY SHOP " A Place To Escape from Reality"! TD
214 State St. Suite 209
Hackensack, NJ 07601. 201-820-1347
LIVE Mini-Z RACING EVERY Fri at 7 PM.
Outdoor Saturday On Road Racing 1/8GTVE,1/10TC&USGT


DG DESIGNS

machgo5go is offline   Reply With Quote
Old 2010.08.24, 01:35 AM   #21
tudor_47
Registered User
 
tudor_47's Avatar
 
Join Date: Jul 2004
Posts: 360
I have received the T-plate and I am mounting it now... looks good.
__________________
/Johnny
P28GT(Spektrum,HK ESC,Lipo, Futaba servo) P28V2(MR03VE, Futaba servo) Mini-z F1 (Kyoshos 2.4)

Get a P28

Our new track at MiniZata Were we race My P28

Last edited by tudor_47; 2010.08.24 at 05:24 AM.
tudor_47 is offline   Reply With Quote
Old 2010.08.30, 11:53 PM   #22
fascinate22
Guest
 
Posts: n/a
hey!

thanks for the ;post
  Reply With Quote
Old 2010.09.05, 07:10 PM   #23
kromie101
Registered User
 
kromie101's Avatar
 
Join Date: Oct 2008
Location: North carolina
Posts: 848
well,just ran my new f-1 and it felt pretty good to me. landon said it would be a whole lot better with a mantis t-plate.i bought one and i'm gonna try it in a few days. i might have got bit by the f-1 bug.
kromie101 is offline   Reply With Quote
Old 2010.09.08, 01:30 PM   #24
donnah246
Guest
 
Posts: n/a
hey

thanks for post
  Reply With Quote
Old 2010.10.08, 01:31 PM   #25
MantisMMA
tire schredder
 
MantisMMA's Avatar
 
Join Date: Sep 2008
Posts: 864
Just in time for the worlds!!! i am releasing super soft T plates monday, they are on the machine right now and will be complete today. they are .5mm thick and will increase rear traction even more!
__________________
MantisWorx
www.rcshox.com
professional RC products

Marcus Williams
MantisMMA is offline   Reply With Quote
Old 2010.10.08, 04:03 PM   #26
lfisminiz
MINI-Z BODY NUT
 
lfisminiz's Avatar
 
Join Date: Mar 2003
Location: pa.
Posts: 5,028
Marcus, save 1 for me.
__________________
MINI-Z BODY NUT





DG DESIGNS - PN RACING - MANTISWORX
lfisminiz is offline   Reply With Quote
Old 2010.10.13, 08:32 PM   #27
MantisMMA
tire schredder
 
MantisMMA's Avatar
 
Join Date: Sep 2008
Posts: 864
the soft plates are ready, just order the t plate as per norm but specify which one you want.
__________________
MantisWorx
www.rcshox.com
professional RC products

Marcus Williams
MantisMMA is offline   Reply With Quote
Old 2011.03.08, 09:03 PM   #28
MantisMMA
tire schredder
 
MantisMMA's Avatar
 
Join Date: Sep 2008
Posts: 864
G10 plates in the works, should be ready in a few weeks!
__________________
MantisWorx
www.rcshox.com
professional RC products

Marcus Williams
MantisMMA is offline   Reply With Quote
Old 2011.03.08, 09:09 PM   #29
MantisMMA
tire schredder
 
MantisMMA's Avatar
 
Join Date: Sep 2008
Posts: 864
a little off topic but im hosting a national 10th scale F1 race next month

__________________
MantisWorx
www.rcshox.com
professional RC products

Marcus Williams
MantisMMA is offline   Reply With Quote
Old 2011.03.08, 09:12 PM   #30
pedrocamp
Ain'tSoldEm
 
Join Date: Jul 2006
Location: Mooresville, NC
Posts: 860
Wish I could join the fun! You have some pretty cool 10th scale F1 stuff out!
__________________
High Speed Hobbies
pedrocamp is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
WTB: Atomic damper plate system and car stand TannerT Mini-Z Marketplace 1 2009.07.24 06:12 PM
New pn 94mm motor- Does it fit the atm ssg 94mm damper plate system erixxst Parts and Hop-ups 6 2008.08.28 03:30 PM
Atomic Damper Plate System Fusion Mini-Z Racer MR-02 3 2006.01.11 02:13 PM
springs for atomic damper plate system? cam2 Setups 24 2004.11.30 12:51 PM
Product Review: the CLK Front Bumper Plate West.F1 Parts and Hop-ups 6 2003.02.27 10:49 PM


All times are GMT -5. The time now is 02:55 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2011 Mini-ZRacer.com
Mini Inferno Sale - Up to $85 Instant Savings!
Micro-T Hop-Ups
RC18R, M18, Micro RS4, Mini-LST, TamTech-Gear, Minizilla, RC18T, RC18B, RC18MT
shop.tinyrc.com Products

more»
Tiny RC Community News
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated. The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year.  Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All! Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»
Mini-Z, Mini-Z Racer, MR-02, MA-010
M18, M18T, RC18T, Mini-LST, Mini-T, Micro RS4, XRay, 1/18, 18th scale
XMODS, XMOD, Micro Flight, ZipZaps, ZipZaps SE, Bit Char-G, MicroSizers, TTTT, Plantraco Desktop Rover, SuperSlicks, Digi Q
Mini Inferno, Mini Inferno ST, half EIGHT, 1/16, 16th scale
Epoch, Indoor Racer, 1/43, 43rd scale
E-Savage, eSavage, eZilla, e-Zilla, HPI
Robots, Bots, Bipeds, Wheeled, Manoi, Roomba, NXT, Lego, Hacking
Crawling, Crawlers, Micro, RC, Losi Mini-Rock Crawler, Duratrax Cliff Climber
Kyosho Minium, Caliber 120, Minium Forums
Mini-Z Hop-Ups, Mini-Z Parts, Mini Inferno Hop-Ups, Mini Inferno Parts, M18 Hop-Ups, M18 Parts