My Overland just stopped working. I had nothing, no power, no steering. Well after taking it apart I can see why things arent working. All of the wires were hanging on by just a strand or two to the board, and then broke. When I opened it up I got confused on which pins need to be soldered together on the steering fets. If you look at this pic you can see the mess I have to fix. The previous owner soldered a big glob onto the outputs. It seems to me that only 3 of the pins should be soldered together, but on one of the fets all 4 or connected. So what pins should be soldered together?
This is a pic of a racer board I found while searching for an answer here, it appears that the outputs are soldered differently than mine.
Which is correct? They appear to be the same board so should the soldering be the same?
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»