Has anyone had trouble with installing bearings on your OL?
Here is my situation, it has been rectified, but it would be interesting to see if anyone else had a similar problem.
The 2 smallest bearings, in the gear case is where my trouble happened. I installed all 9 and these fit in the hole fine. But the problem that arised was that when i closed up the case an screwed it down, when i ran my OL, the engine was really really high pitched, like it was having trouble running. So, after some tinkering, i had to loosen the 2 screws that hold the gear cover on to give it room to move more freely.
Let me know if anyone else has had that problem or one similar.
Thanks guys!
P.S. All is well now, we are back to truckin'!
__________________
Skidmarks.....not just for underwear anymore.
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»