Hi all , having bit of a problem with my am ma010 which I'm converting to asf .
I have fitted a new md014 board , along with a new xspeed asf awd motor and don't seem to be able to get it to bind to any of my kt18 controllers .
I'm getting a continuous flashing red led on top of the board whether I hold the bind button on or not when switching the power button on . I've searched and can't seem to find any information so hoping somebody could maybe point me in the right direction please?
I have tried all three of my kt18 that will bind fine to any of my other mini z or dnano so reckon I count on those being fine .
I've tried fresh alkaline batteries in all kt18s and have tried several freshly charged sets of batteries in the car .
I have inspected the wiring which all looks to be good .
I have bridged the board at the switch wires to discount faulty on/off switch
I've tried the binding process outside away from other radio signals/Bluetooth/wireless etc
Now I'm stumped , thinking maybe the new board itself could be faulty?
Thanks for advice , got it sorted . You were 100% correct on the switch .
Had a few more attempts with the switch , got fed up and bridged over the outer soldered terminals of the switch on the board with a paper clip and and it paired up first time .
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»