To end all the debates about chips and which is best...the conclusion would appear to be :
the 7389 is the better chip when stacked 2x3 next
to the 4562 but in a single fet application the 4562 wins.
After all, performance is what we are looking for, right?
i've got a 2x3 7389 stack in a mr01
and a 2x3 4562 stack in a mr02
i feel that the 4562's give more punch... don't know if its bec of the new board or not... but from what i've read, the 4562's are the best thus far...
don't know now since there more fet's have come out and i've only tested the two kinds vs. the stock fet...
i've got a 2x3 7389 stack in a mr01
and a 2x3 4562 stack in a mr02
i feel that the 4562's give more punch... don't know if its bec of the new board or not... but from what i've read, the 4562's are the best thus far...
don't know now since there more fet's have come out and i've only tested the two kinds vs. the stock fet...
any others?
I remember reading about a new FET 4511 but I can't find it.
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»