All MR02 parts are compatable with the 2.4ghz cars. The main chassis is the same, the only difference on the LM chassis are the knuckles, and motormount/suspension.
__________________
EMUracing Micro RC Syndicate /DG Designs /GSR /Reflex Racing /Fast By Faqish /MurderTown Racing
I don't have a LM, but I seem to recall from the ASF chassis manual that the knuckle is the same, but the suspension limiter is installed upside down compared to the RM/MM. I'm sure EMU will correct me if I'm wrong.
I am pretty sure that the suspension limiters are installed the same on the MR02 RM/MM/LM. Only the knuckles are different on the front end. The LM knuckles lower the ride height a little while maintaining the same suspension travel. I used to install the suspension limiter above the spring for a few years, and recently reverted back to the normal method to get some "damping" effect as the limiter travels on the kingpin (no grease or fluid used). Honestly, I dont really notice any difference.
__________________
EMUracing Micro RC Syndicate /DG Designs /GSR /Reflex Racing /Fast By Faqish /MurderTown Racing
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»