Hobby Hut - Mini-z racing - 2015
2828 Audubon Village Dr.
Audubon PA, 19403
https://www(dot)hobbyhutrc(dot)com/
***News flash - Additional racing venue at Hobby Hut ***
The dates below are when we will have the RCP track set up to race with our Club lap counting system and one or more of our club members will be on hand to help out with any issues.
The dates below are all Sundays, 11am to 6pm. We usually start our heats around 1pm - 2pm and start our mains around 3pm - 4pm.
I will update who plans to be there and who has attended as our schedule progresses. (asterisk designates dates past)
------------------------------------------
Schedule, 2015:
09/06: Al, Eric, Larry, Ed **
09/27: Al, Larry, Quinn, Matt(Hobby Hut) **
10/18: Al, Larry, Eric, Quinn, Chris, Matt **
11/08: Al, Quinn **
11/22: Al, Larry, Eric, Quinn **
12/13: Al, Larry, Eric, Quinn **
01/03: Al, Larry, Eric, Quinn **
01/24: Al, Larry, Eric, Quinn ** Canceled - Snow
01/31: Al, Larry, Eric, Quinn **
05/01: Al, Larry, Eric, Quinn, Tony, Andy **
05/22: Al, Larry, Eric, Quinn, Tony
-------------------------------------------
Tech Regulations:
Rubber tires only (no high content silicone)
*No traction compounds allowed in any classes, including "WD40", only water or motor spray to clean tires
Box Stock - Sports Racers or ASF
7 tooth Pinion gear max and Stock Differential only!
Stock Fets, switch, board wires and battery jumper wire.
The idea is to keep all car at roughly at same handling and speed level.
The only advantage should come from preparation/maintenance of mostly stock car and driver skill
Only allowable mods:
1. Tires and rims(Kyosho tires Only)
2. Bearings
3. T-plate
4. Aluminum knuckles(0 Degree only)
5. Front springs
6. Rounding of front bumpers.
7. Stock Window Only - no lexan
8. Metal servo gear
9. DDS system for 98mm platform - (20.00 to 25.00 dollar retail value)
Box stock motor only!
(4) NiMH AAA cells only
-----------------------------------------
Hfay 70t
Any gearing
2WD or AWD
Any mass produced, injection molded body for 1/28th scale racing.
No lexan bodies
86-102mm wheelbase
No open wheels
Any electronics
PN 70turn bag stock motors/box stock - no mods, break-ins and comm drops only.
(4) NiMH AAA cells only
---------------------------------------------
Mod:
Any chassis, carbon or otherwise
2WD or AWD
Body scale must fall in or near 1/28th, lexan or injection
86-102mm wheelbase
No open wheels
Any motor (brushless included)
Rubber tires only (no high content silicone)
Any battery up to 8.4 volts
---------------------------------------------
F1:
Kyosho F1 chassis only (MF01, MF015)
Kyosho F1 bodies only
No lexan bodies
Any electronics
Aftermarket wings and front bumpers allowed
PN 70turn bag stock or factory box stock, no mods, break-ins and comm drops only
Rubber tire only (no high content silicone)
(4) NiMH AAA cells only
Transponders and lap counter services are included in the race fees. $10 race fee per driver on our club days. We use the GiroZ system for our club races and you can purchase your own GiroZ transponder from our club for $40. We do offer loaner transponders as well but if you get serious about racing these cars, always easier to have your own.
Any questions, either stop by and check us out or PM me here and I'll do my best to respond in a timely fashion.