what does the a/b-position switch on the back of the KT-5 transmitter do?
it seems it moves the throttletrigger a bit to the front for more accurate throttle.
is there anything more to it?
As far as I can work out, you've got it right. You can alter the throttle to give more 'travel' for forwards and less backwards, or more for backwards and less for forwards (why!)
Though if you reduce the rearward travel of the throttle it helps with 'braking' - You can give it just a little 'tap' on the trigger with out going into full reverse.
The A/B switch on the KT-5 controller is realy sweet! It limits reverse to the point of giving the Mini Z Racers a usable break. It limits reverse to a crawl but while running in forward hiting full reverse now just slows the car down like real breaks.
If you have ever driven a standard Mini Z Racer with the original Perfects controler you would know why I think the KT-5 is sweet. The only down side is the KT-5 dose not have a recharging jack.
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»