One of our racers at High Speed is having a problem. Had his transponder plugged in the board of his MR03 and didn't notice the wires on the plug were bear. They touched and now there is no steering. Throttle works, but nothing else. I don't see anything burnt on the board.
Has anyone else ran across this and or know a fix.
One of our racers at High Speed is having a problem. Had his transponder plugged in the board of his MR03 and didn't notice the wires on the plug were bear. They touched and now there is no steering. Throttle works, but nothing else. I don't see anything burnt on the board.
Has anyone else ran across this and or know a fix.
Thanks,
Wade
Look on the bottom of the board directly under the transponder socket. You should see a burnt trace, connecting to the 3 pin from the right. You need to jump this with a little piece of wire. Worked perfectly for me, and saved the board.
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»