Hey Andy - Don't you love stuff that doesn't have any instructions!
Check out my picture.
A - Bottom Damper Brace
B - Top Damper Brace
C - Top Damper Brace Mounting Washers
D - Shocks
E - Screws
"A" attaches to the bottom of your H-Plate. Screws will go through "A" then through the H-Plate and then tighten down into the motor pod.
Then you can use 2 screws "E" with the Blue Washers "C" to attach "B" to the car.
Finally, you can slide the shocks "D" in between "A" and "B" and tighten them down with 4 screws.
It's easier to explain in person. Let me know if you need any help.
BTW that PN Motor you have is safe for your Z. Doesn't need FET upgrade.
__________________ ATLANTA Mini Racing ATOMIC - GPM - Airtronics - Kyosho - Intellect - PN Racing
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»