PN damper does 94/98 MM, it will work. Basically any PN ML type damper plate, or atomic 94mm if what I see in the low resolution pic on their site is correct.
__________________
EMUracing Micro RC Syndicate /DG Designs /GSR /Reflex Racing /Fast By Faqish /MurderTown Racing
So if you are running a disc damper, do you still have to fly the tri-shock CF wing on that mount, or is there a simpler way to attach it?
I'm looking for a new MM pod, with my primary use likely to be 98mm, but I do like the possibility of 102LM. Trying to decide between this and the LCG v5 mount.
I was hoping to order the PN disk damper. It doesn't state it's 102mm capable specifically with mount I have. I do have the tri-damper cross bar that comes with the mount.
I was hoping to order the PN disk damper. It doesn't state it's 102mm capable specifically with mount I have. I do have the tri-damper cross bar that comes with the mount.
This looks like the damper plate designed to work with that mount. It kind of looks just like all the other 98mm disc damper plates, except two holes for the side dampers. Even though is says 98mm, from what I've gathered, it's only the rear axle position moves to change from 98 to 102. The T-plate and disc damper maintain the same position. That seems to be the selling point of that mount: that you can change the motor and the wheelbase without touching the T-plate or damper.
Thanks. I don’t run 102mm much, if at all. It seems I build a 102mm every couple years only to run it and sell it. There are some races coming up that are specific to 102mm and curious to put some of my painted C9’s back on the track.
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»