Summer shootout trophy race (RC Car World) July 7,
This is our Summer shootout trophy race. The 3 classes will be running our Kyosho Stock, 70 comp stock class and modified. They will be 2 qualifying Heats and mains.
RC Car World
4340 N Route 130, Willingboro, New Jersey 08046
Kyosho Stock-
Kyosho chassis, no modifications
Stock electronics, no modifications
Stock motors & PN 70t motors are OK too, no modifications
AAA rechargeable nimh only
Kyosho bodies, no modifications (whitebodies with paint or stickers are OK)
Aftermarket front body mounts and reinforcements are OK
Kyosho tires, no doping
T-plate open
Front springs open
94 & 98mm bodies that can't fit the LM or MM2 mount can run a PN Multi Length Disk Damper with soft springs only
86 & 90mm bodies are open disk damper with stock motor mounts
Bearings are encouraged
Wheels can be replaced with similar offsets
Metal wheel nuts are encouraged
Aftermarket servo gears are OK
70 comp class :
AAA batteries with any 70 turn brush motor or any 3500 KV brushless motor.
Kyosho Hardbody only no Lexan bodies
Modified class: Any 2wd or 4wd
8.4 lipo pack or AAA batteries.
Open body: lexan body or hard body
Run what you brung and hold on tight
We will have one largest mini z track. 3 tiles wide and very flowy course. Will have a great driver stand to look over the top of the layout.
Top 3 finishers get trophies.
We will lay the RCP track over top this big carpet track. And we'll make the largest and fastest Mini z track..
Pit Area is big
__________________
Atomic Team Driver
FAST by FAQISH
I am going back to the way the rules we did at Hobbytown tom river NJ in box-stock class. after buying a new box stock car this gives them an option to there set up
Kyosho BoxStock Class
Brush or brushless car Kit are allowed
Kyosho chassis, no modifications
Stock electronics, stock FETS
Stock motors & PN 70t motors or any 3500kv brushless (PN,GL
TECH- 70 turn needs to have a 9 tooth pinion
3500kv motor can have a 10 tooth pinion
but you need to have the Kyosho stock gear diff
AAA rechargeable NiMH only
Kyosho bodies, (white bodies with paint or stickers are OK)
3d print wings are ok
Aftermarket front body mounts and reinforcements are OK
Kyosho tires or PN tires only
T-plate open
Front springs open
94 & 98mm bodies that can't fit the LM or MM2 mount can run a PN Multi Length Disk Damper with soft springs only
86 & 90mm bodies are open disk damper with stock motor mounts
Bearings are encouraged
Wheels can be replaced with similar offsets
Metal wheel nuts are encouraged
Aftermarket servo gears are OK
__________________
Atomic Team Driver
FAST by FAQISH
Last edited by tommy_greeneyes; 2019.06.14 at 02:27 PM.
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»