Hello,
I posted this under another existing thread but wondering if it gets no visibility..
Or maybe just no one want or can answer :-)
I'm curious to know if anyone has experience with adding a layer of fets or upgrading to more powerful fets on a MR03/MA02 VE brushless board.
I was listening to the YouTube reviews of our Spanish friends from TRP about the PN VE motors and the guy goes on about how these motors really benefit from FET upgrade.
I searched the net and to my surprise I could only find posts and tutorial about 'fetting' brushed boards.
Anyone has done it and found it to work?
Cool thanks for the message.
Am I right that only the fets on the top side of the board need upgrading?
The ones on the underneath are for reverse.
I'm thinking of adding a layer of stock fets to the top fets. Is this a good option?
I dont believe that they fets are forward/reverse specific so upgrading one side will make a 3x3 layer and therefore an overall improvement to the battery amperage delivery.
Making room for the stack is likely easier on top but be careful to avoid screws going through from the damper area contacting the fets/creating a short
__________________
I wonder what rocket scientists say to their coworkers when one of them doesn't get it?
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»