Mini-Z, Kyosho Mini-Z Racer, MR-03, MR-02, MA-010, Forums, News, Pictures, Parts, and Shop - Mini-ZRacer.com
Forums, Mini-Z, MiniZ, Kyosho Mini-Z, Kyosho MiniZ, Kyosho Mini-Z Racer
Mini-Z Hop-Ups, Mini-Z Parts, MiniZ Hop-Ups, MiniZ Parts, Kyosho Mini-Z Hop-Ups, Kyosho Mini-Z Parts, Kyosho MiniZ Hop-Ups, Kyosho MiniZ Parts, Kyosho Mini-Z Racer Hop-Ups, Racer Kyosho Mini-Z Parts
Old 2018.06.11, 08:38 AM   #1
jimbo_wa
Registered User
 
Join Date: Jun 2018
Posts: 7
MB-010VE 2.0 ESC issue?

Hi, I've recently built up a bunch of parts into a working buggy, but am having major issues with the ESC/motors.

I have both the original 8500kv red motor and the ECO 5600kv blue motor. The blue motor will not even spin the wheels and the 8500kv motor cogs exceptionally badly:

https://youtu.be/ylDHgIA215o

Thinking that a FET has blown as both motors are struggling?

When not in contact with the ground the wheels spin fine and free - there's no binding in the transmission and I've swapped the clutch from 3 arm to 4 arm with no difference...

Nothing seems to be overheating and using the Scorpion programming cable (connects fine) settings all stay saved etc.
jimbo_wa is offline   Reply With Quote
Old 2018.06.18, 09:30 AM   #2
mleemor60
Curmudgeon & Moderator
 
mleemor60's Avatar
 
Join Date: Jan 2008
Location: Kannapolis, NC
Posts: 2,549
Sounds like a low voltage situation.
mleemor60 is offline   Reply With Quote
Old 2018.06.18, 09:33 AM   #3
jimbo_wa
Registered User
 
Join Date: Jun 2018
Posts: 7
Quote:
Originally Posted by mleemor60 View Post
Sounds like a low voltage situation.
Cheers mleemor60, however it's the same when using a set of AAA 3.7v LiPo cells and dummies.

The ESC and motor gets so hot that it detached a couple of FETs from the underside of the ESC!
Attached Images
File Type: jpg IMG_20180612_135201.jpg (479.8 KB, 10 views)

Last edited by jimbo_wa; 2018.06.18 at 09:40 AM.
jimbo_wa is offline   Reply With Quote
Old 2018.06.18, 03:31 PM   #4
mleemor60
Curmudgeon & Moderator
 
mleemor60's Avatar
 
Join Date: Jan 2008
Location: Kannapolis, NC
Posts: 2,549
Oh. make that over voltage. I don't think the board is any good beyond 6.6V. If you are running a pair of blanks and the 3.7's in series you may have your answer. Kyosho made a LIFe pack for mini Z use. I would look for a set of those with all the appropriate harnesses and another board too. You have probably let the smoke escape from the one shown in the photo.
mleemor60 is offline   Reply With Quote
Old 2018.06.19, 02:40 AM   #5
jimbo_wa
Registered User
 
Join Date: Jun 2018
Posts: 7
I'm not sure...

I also have a standard buggy with a Chilli brushed motor which is fine (mental) on the LiPo's and with standard NiMh (sane-ish). Previously using the same NiMh cells on the brushless resulted on lots of heat and major cogging.

None of the FETs are smoked (sight or smell) and I can get the ESC working again (temporarily) by holding the FETs back on their pads - they just melt off again when driving.

I think this must just be a faulty ESC, but for the cost of a new one and finding it in stock, (Japan seems the only option) I could replace all the electrics with standard hobby parts!
jimbo_wa is offline   Reply With Quote
Old 2018.06.19, 05:49 AM   #6
mleemor60
Curmudgeon & Moderator
 
mleemor60's Avatar
 
Join Date: Jan 2008
Location: Kannapolis, NC
Posts: 2,549
What gear ratio are you pulling? Pinion tooth count? Try putting a MUCH smaller pinion on it and see if it changes anything. RC Kenon has plenty of parts and accessories for the buggies and they are Stateside.
mleemor60 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Hacking the r124501b ESC pcb for use with an arduino PIC subsoniq Mini-Z Monster MM-01 8 2011.09.22 10:46 PM
M 11 Mr 02 2.4 reverse issue tbar1981 Transmitters, Receivers and Crystals 3 2010.03.12 01:45 PM
New Version Firelap 2.0 mailboxck FireLap 72 2008.02.17 08:41 PM
Firelap 2.0 Steering Issue Twenty-Se7en iWaver 21 2005.12.04 02:39 PM
receiver and esc davisdavis Setups 2 2004.07.26 10:53 AM


All times are GMT -5. The time now is 08:54 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2011 Mini-ZRacer.com
Mini Inferno Sale - Up to $85 Instant Savings!
Micro-T Hop-Ups
RC18R, M18, Micro RS4, Mini-LST, TamTech-Gear, Minizilla, RC18T, RC18B, RC18MT
shop.tinyrc.com Products

more»
Tiny RC Community News
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated. The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year.  Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All! Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»
Mini-Z, Mini-Z Racer, MR-02, MA-010
M18, M18T, RC18T, Mini-LST, Mini-T, Micro RS4, XRay, 1/18, 18th scale
XMODS, XMOD, Micro Flight, ZipZaps, ZipZaps SE, Bit Char-G, MicroSizers, TTTT, Plantraco Desktop Rover, SuperSlicks, Digi Q
Mini Inferno, Mini Inferno ST, half EIGHT, 1/16, 16th scale
Epoch, Indoor Racer, 1/43, 43rd scale
E-Savage, eSavage, eZilla, e-Zilla, HPI
Robots, Bots, Bipeds, Wheeled, Manoi, Roomba, NXT, Lego, Hacking
Crawling, Crawlers, Micro, RC, Losi Mini-Rock Crawler, Duratrax Cliff Climber
Kyosho Minium, Caliber 120, Minium Forums
Mini-Z Hop-Ups, Mini-Z Parts, Mini Inferno Hop-Ups, Mini Inferno Parts, M18 Hop-Ups, M18 Parts