This is a high strength 3D printed kit. The material is nylon and printed using SLS technology, meaning high precision. It's akin to commercial plastic injection molded parts.
This part is only compatible with a MR-03 compatible chassis using the newest PN Double A-Arm Front suspension system for MR03 (parts number MR3070 or MR3062).
This kit lengthens both the upper and lower arm lengths from the stock PN lengths by 2mm on each side. This allows you to run zero offset rims for many popular racing bodies, which normally would have required a 2mm offset front rim.
Why this is important is that this gives you consistent handling and precise steering. This is due to the fact that there is reduced play in the fit of the components and it takes away the MR-03's variable camber effect which can lead to handling issues like flipping after straightaways into turns, inconsistent steering feedback, etc... as there is too much camber gain while cornering.
Kit comes with:
2 long upper arms with sway bar mount
2 long lower arms
6 long MR-03 toe-bars:
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»