I know there is a thread on iw02 and reception issues and the owner just decided to swap in an mr01 pcb
well looks like my iw02 is starting to suffer the same issues.....
i fetted the board and it worked great for about 2 weeks.... then at the races I ran it hard for about 40 laps.. decided that i need a new motor.... scored a deal on the atomic z2 and ran for that with a bit......
after running thru a set of batteries my cars reception got really poor... and now its still really poor......
i checked the traces on the pcb and everything looks to be fine, but its just not working well at all with the reception range being really bad,
i pretty much tried to do the pcb swap but my mr01 pcb was crap and it started to fry about 3 mins into running it.. it was fetted as well.....
so....... i decided to replace all the wiring as i was putting back the orginal pcb and it didn't help any.,,,.......changed the fets over and everything....
anyone else experiencing poor iw02 reception? anyone know how to fix it? i replaced the wires to the antenna etc, and even tried to attach it to the other side of the resistor, but it doesnt' help......
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»