I noticed that I have no braking power with the PN DSM2 Board. Even if I put the brakes to the maximum of 85 % in ICS manager, the braking power is nearly Zero. The transmitter is also set to 100%.
Is there a way with which I can get more braking power, or does it only work with the ASF board ?
I noticed that I have no braking power with the PN DSM2 Board. Even if I put the brakes to the maximum of 85 % in ICS manager, the braking power is nearly Zero. The transmitter is also set to 100%.
Is there a way with which I can get more braking power, or does it only work with the ASF board ?
Ty
Flo
This is strange..what radio do u use? . Does the reverse work without and issues? Is it the v1 or v2 board? Normally I run my break power in the ics @ 60% and 100%hp on the radio then set my break d/r to 75-80 I am using the v2 board with dx4s
I also use the Dx4s. When I put the braking power in the ICS from 0% to 85%, I notice a very small difference. I would appreciate the braking performance on 5%. The reverse gear is absolutely no problem. (backing Time 1). How can I see if I have V1 or V2?
I also use the Dx4s. When I put the braking power in the ICS from 0% to 85%, I notice a very small difference. I would appreciate the braking performance on 5%. The reverse gear is absolutely no problem. (backing Time 1). How can I see if I have V1 or V2?
Ty
Flo
The v1 has the very small solder pads for the main Power and the v2 has the bigger pads....
It's definitely a V2 board. Today I have also tested an atomic 48t engine next to the PN50. As before, no brake. And that in all three boards. You wrote that your radio has 100% HP. What means HP?
It's definitely a V2 board. Today I have also tested an atomic 48t engine next to the PN50. As before, no brake. And that in all three boards. You wrote that your radio has 100% HP. What means HP?
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»