Help again, trying to mesh pinion gear w/ diff gear!!!
Now that I got the motor mount screws off and mounted the x-speed motor, the pinion and diff gear do not mesh. Any suggestions? I still have the stock diff and will be ordering a ball diff soon. help!!!
You will find a parts tree with black plastic rectangles marked .5, 1 and 1.5. These are used in the motor mount to space the motor for correct gear mesh. With the 6 tooth gear you may have to remove any spacers presently in the motor mount to get correct mesh.
We use these plus thin cardboard pieces in the motor mount to get the best gear mesh.
Hope this helped.
PS: We've found the 8-tooth pinion to be the best setup for our track when running stock motors.
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»
[09/23/14] shop.tinyrc.com: New Atomic,... : Hey Racers!
It's been a busy week here at shop.tinyrc.com. Plenty of new and re-order products have been rolling in along with some - more»