Not really a track but it's fun. It still needs better supports and side rails. The material is post-form high-pressure laminate. With the finished side down, the phenolic backer is a good running surface but it might be a bit abrasive for some.
__________________ Sig
MA-010
Millenium Jade R34 readyset, drifter
No front lip or rear wing
Cut pen springs in back, ultra high spring rate
3 wheel lock nuts
Free mods FTW
Ken, I'm working on a few prototype banked turns for the RCP design. I will post some pictures when they're finished. Some of the idea's I am incorporating work well, but I think they will work better,once I finish manufacturing larger radius outside corners . I am waiting for more feedback on the original turns before I incorporate them into production schedule. The original corners have a 19 1/2 inch radius. I am all set up at my factory for larger radius turns, 45 degree transitions and blank tiles.
I wanted to incorporate banking into the Kyosho Cup Series, but the organizers wanted the track flat. They where concerned about the front wing of the F-1 rubbing at the bank entry. I believe the bank can be achieved without the F-1 front wing rubbing. I know this for a fact, because at the RCX show last year, my bridge track in the Kyosho booth had a slight bank at the bridge upward transitions. The F-1's wing did not rub.
Wow! Very nice track! I am very impressed. I wish I have a place to set up a permanent track like that. What is the surface? Looks like some kind of felt.
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»