Mini-Z, Kyosho Mini-Z Racer, MR-03, MR-02, MA-010, Forums, News, Pictures, Parts, and Shop - Mini-ZRacer.com
Forums, Mini-Z, MiniZ, Kyosho Mini-Z, Kyosho MiniZ, Kyosho Mini-Z Racer
Mini-Z Hop-Ups, Mini-Z Parts, MiniZ Hop-Ups, MiniZ Parts, Kyosho Mini-Z Hop-Ups, Kyosho Mini-Z Parts, Kyosho MiniZ Hop-Ups, Kyosho MiniZ Parts, Kyosho Mini-Z Racer Hop-Ups, Racer Kyosho Mini-Z Parts

Go Back   Mini-ZRacer.com Forums > General Discussion > Motor Tech

Reply
 
Thread Tools Rate Thread Display Modes
Old 2003.03.13, 12:26 AM   #1
Skylineboy
ZoomZoom
 
Skylineboy's Avatar
 
Join Date: Jul 2002
Location: Australia, Vic
Posts: 206
Did I purchased the correct capacitors for my stock motor?

Hi everyone,

My old stock motor is not functioning very well and today I went to purchased a new silver can motor and some capacitors with "103" printed on them. They are blue and is a different shape when compared with the ones on the stock motor. Did I purchased the correct capacitors?

Thanks for any help in advance.

Skylineboy
Attached Images
File Type: jpg capacitors.jpg (27.4 KB, 53 views)
Skylineboy is offline   Reply With Quote
Old 2003.03.13, 12:48 AM   #2
William
Mini-Z Pro
 
Join Date: Jan 2003
Posts: 104
i guess these are fine
does that motor come with carbon brushes?
William is offline   Reply With Quote
Old 2003.03.13, 02:34 AM   #3
Skylineboy
ZoomZoom
 
Skylineboy's Avatar
 
Join Date: Jul 2002
Location: Australia, Vic
Posts: 206
William,

I think the motor have the same brushes as the standard stock motor.

Skylineboy
Skylineboy is offline   Reply With Quote
Old 2003.03.13, 05:17 AM   #4
Psyklops
I am a Z-aholic ;)
 
Psyklops's Avatar
 
Join Date: Jul 2002
Location: Melbourne, Australia
Posts: 706
Send a message via AIM to Psyklops
Hi Skylineboy....if you purchased that motor from D_ick Smith or Jaycar, open it up, as I am almost sure you will find the brushes are not carbon....but the brass or copper ones. If so, get some carbon ones, and replace them...also, find out the number of winds and wire gauge on that motor....you could burn your FETs.

As far as the caps go, I think they are fine, as they look like non polarised caps similar to what I have. But open that motor up...it is worth it for peace of mind.
__________________
NOTHING is forever.....ESPECIALLY Mini Z bodies
Psyklops is offline   Reply With Quote
Old 2003.03.13, 08:25 AM   #5
Skylineboy
ZoomZoom
 
Skylineboy's Avatar
 
Join Date: Jul 2002
Location: Australia, Vic
Posts: 206
Thankyou Psyklops :)

Thanks for the advice, for you might have save my Z from burning out the FETs! (i was planning to put the motor in tomorrow)

You are very good! I did bought the motor from D. Smith. I'll opened up the motor tomorrow to have a look at the brushes and check out how many turn is it.

Skylineboy
Skylineboy is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Atomic Stock R and Kyosho Alu Motor Holder AFMiniz Mini-Z AWD MA-010, MA-015 4 2008.05.07 10:46 AM
Specs on stock motor? WildWillie Mini-Z AWD MA-010, MA-015 0 2008.04.21 10:42 AM
HFAY Stock Motor Class Shaun Tracks and GTGs 2 2006.11.12 12:25 PM
AD Stock Motor FET Help 4miniz4life Mini-Z Racer MR-02 3 2006.03.04 12:13 AM
Motor Capacitors... Draconious Parts and Hop-ups 2 2001.12.11 04:02 AM


All times are GMT -5. The time now is 07:55 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2011 Mini-ZRacer.com
Mini Inferno Sale - Up to $85 Instant Savings!
Micro-T Hop-Ups
RC18R, M18, Micro RS4, Mini-LST, TamTech-Gear, Minizilla, RC18T, RC18B, RC18MT
shop.tinyrc.com Products

more»
Tiny RC Community News
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated. The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year.  Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All! Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»
Mini-Z, Mini-Z Racer, MR-02, MA-010
M18, M18T, RC18T, Mini-LST, Mini-T, Micro RS4, XRay, 1/18, 18th scale
XMODS, XMOD, Micro Flight, ZipZaps, ZipZaps SE, Bit Char-G, MicroSizers, TTTT, Plantraco Desktop Rover, SuperSlicks, Digi Q
Mini Inferno, Mini Inferno ST, half EIGHT, 1/16, 16th scale
Epoch, Indoor Racer, 1/43, 43rd scale
E-Savage, eSavage, eZilla, e-Zilla, HPI
Robots, Bots, Bipeds, Wheeled, Manoi, Roomba, NXT, Lego, Hacking
Crawling, Crawlers, Micro, RC, Losi Mini-Rock Crawler, Duratrax Cliff Climber
Kyosho Minium, Caliber 120, Minium Forums
Mini-Z Hop-Ups, Mini-Z Parts, Mini Inferno Hop-Ups, Mini Inferno Parts, M18 Hop-Ups, M18 Parts