Eman- We only recommend using the correct module in the correct Tx. Some people may not have a problem, but there is a difference between the modules. This is why we make different module if there needs to be a difference.
Felix2010- Sounds like the solder joints for the module pins inside the Tx may be damaged and not the antenna. Most likely it is the solder joint that goes from the module pin and the PCB trace goes to the antenna mount.
Thanks for responding. I received the correct module and all is good. I have another question. What is Advanced HSR and Super HSR? Is this the speed the transmitter send commands to the receiver?
__________________ Photos
"Necessity is the mother of all invention"
Thanks for responding. I received the correct module and all is good. I have another question. What is Advanced HSR and Super HSR? Is this the speed the transmitter send commands to the receiver?
Yes these are the speeds that the transmitter sends the commands to the receiver. You have to use the correct response for the board (Mini-Z) that you are using. You can find the chart for the chassis and responses here.
Advanced HSR is the fastest response in the Helios, switch in H position and 2 channel setting. (8.0ms)
Super HSR is the next fastest response, switch in the H position and 3 channel setting. (11.0ms)
Normal response, switch in the N position (down). (16.0ms)
New to Mini Z but not new to RC. I am trying to find the exact part numbers for the items needed to use my 3PK with the MR-03. It looks like you only need two items. The module adapter and the module, i think that is correct. If somebody could please post the correct module part number.....that would be awesome!!!
Hi there
I'm looking for an EX-10 Helios or EX-10 Eurus, and the 2.4ghz Mini z module I think its the RF901sm for the Helios or 902sm for Eurus, I'm based in the UK so do you have a UK distributor or where is the best place to purchase internationaly from?
Hi there
I'm looking for an EX-10 Helios or EX-10 Eurus, and the 2.4ghz Mini z module I think its the RF901sm for the Helios or 902sm for Eurus, I'm based in the UK so do you have a UK distributor or where is the best place to purchase internationaly from?
The Helios has been discontinued and replaced with the Eurus. Either the RF-901SM or RF-902SM will work with the Eurus, but the 902SM would give you better response.
RC Disco is the UK distributor and you can order from them.
The Helios has been discontinued and replaced with the Eurus. Either the RF-901SM or RF-902SM will work with the Eurus, but the 902SM would give you better response.
RC Disco is the UK distributor and you can order from them.
just a shame they dont know what a mini z module is
also the problem is the fact the 902 dont work with the helios
__________________ Team B.E.R.T
MR02/3 eating MA010
MR-03
HFAY S9 F1 Winner
Sinister V1
MRCG Prototype
MRCG 1.0 The uk's premier shop for mini-z Bleeding Edge Racing UK
I have a EX1-UR with a drop down kit which is getting stuck when I select SETUP on the MENU. I can't adjust any settings or get out of SETUP unless I turn the radio off. Any ideas? TX board or drop down kit issue? Thanks...
PEDRO...i know what you mean...but i always have my trusty Helios, which i always liked as much or better. Now im tinkering with the EURUS. If a radio goes down...i have a spare or so.
I just got a Turnigy 2.2 Lipo 3 cell, 20-30C discharge battery.
Now, is it safe to use on my KO-Propo Ex-10 Helios? Won't the high discharge damage the radio or the module?
Thanks!
Doesn't work like that! Discharge rate is the maximum possible current that can be drawn. The battery will only put out the amount of amperage that your device requires so there is no danger in having a higher discharging battery.
__________________
In need of a FET upgrade? PM me!
Concerned about sending off your precious Mini-Z? Don't be!
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»