i just got these atm knuckles and the atm bearings don't even fit over the axle, i have these same knuckles on my MM and they are fine, anyone had this problem or got any solutions...
i just got these atm knucles and the atm bearings don't even fit over the axle, i have these same knuckles on my MM and they are fine, anyone had this problem or got any solutions...
yup had the same problem in the past with the older v2 knuckles,had to sand the shaft a little
__________________ Team B.E.R.T
MR02/3 eating MA010
MR-03
HFAY S9 F1 Winner
Sinister V1
MRCG Prototype
MRCG 1.0 The uk's premier shop for mini-z Bleeding Edge Racing UK
you shouldnt damage the thread,use 500g wet and dry.
the shaft will just need a tickle
__________________ Team B.E.R.T
MR02/3 eating MA010
MR-03
HFAY S9 F1 Winner
Sinister V1
MRCG Prototype
MRCG 1.0 The uk's premier shop for mini-z Bleeding Edge Racing UK
1. please post to an appropriate area. kyosho is not the best place for a discussion on atomic knuckle issues.
2. DO NOT POST THE SAME TOPIC MULTIPLE TIMES.
every brand lets a few bum units out. i've had pn parts that had milling flaws, angled taped holes or holes not tapped. atomic and pn have been more consistent for me than 3racing and gpm.
yes, i've had the same issue with pn knuckles even. it's either shaft tolerances or bearing tolerance issue. i just changed out the bearing and moved on. odd thing is, it's only happened with a couple bearings. maybe 4 out of 12.
you could try polishing the shaft to remove the smallest fraction of material or contact the retailer and or manufacturer for a replacement or refund. no point in keeping a bum part.
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»