Name:.........Kevin Pridgeon
Location:.....Vancouver, BC, Canada
Contact:.......PM
Description:..Formula 1 - AM model - no radio
Here's one of my F1's that I've had great fun with. I'm moving to a 2.4 version though, so it's hopefully going to someone who will enjoy it as much as I did.
This car does have some minor steering twitch, so a POT replacement is probably in order, but otherwise it works as expected. Here's what I can tell you about it:
- single stack of 4562's
- tie-rod clips are gone, so included is the ATM alloy tie-rod holder - like new condition
- 1 degree ATM tie rod - you'll want to replace this...
- 0 degree titanium ATM knuckles - good condition
- sheilded bearings (only 6 of them though - 2 in the rear instead of 3)
- not too sure what the tires are, but they are probably some soft PNs... lots of tread left, as they are lightly used
- original Potenza hard-ass tires and wheels will be included
- original plastic knuckles will be included
- will come with the original x-speed motor - works well
- will come with a full set of the small-plastic-parts package (unopened, just the label taken off to fit in with my gear)
- all screws, c-clips, and the full set of pinions and motor guides will be included
- I'll throw in the new-in-package rear wing
- front wing has been glued and is in fair condition
- front bumper has been run but is in ok condition
- body has been slightly modified to fit the I-Lap transponder, so the bump over the servo-gears has been ground down, the underside of the driver as well, and a piece of exposed 35mm film has been put under the driver so the transponder can see the sky without looking like a gaping hole. Looks good and works great! Other than that, the main body is in pretty good condition, having been replaced not that long ago.
- the transponder connector for the giro-z is installed - it's the same connector I use for the I-Lap transponder... If you don't want it, I'll remove it before shipping.
- won't come with a radio or crystals unless you really need them - let me know and we can negotiate on those if you do. I want to keep one of the KT5's I have to mod it into a lefty, since we have a few people who are in need.
- forgot to add: silver lock nuts as well, and...
- those are the kyosho stainless king-pins. I can throw in the originals as well if you want.
Please use PM's - replies in the marketplace are now seller-only.
Thanks,
Kevin.
Last edited by PridgeoK; 2009.12.16 at 02:11 AM.
Reason: Price drop...
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»