does anyone know of high quality delrin knuckles that would offer a -1deg camber? this would really help my right side tire wear, but i will also have to have a 0 deg for the left, are there camber sets?
i get about 1 deg of tire wear (camber) on the outside tire (right side) and when it wears to that angle is when my car seems to handle the best, i was thinking if i put a o deg camber knuckle on the left (for the sake of matching kingpin slop) and a -1 deg on the right, i will handle alot better with new tires and it will take them alot longer to wear since they will wear evenly. so i need to find derlin, or aluminum camber adjusted knuckes, in 0 and 1 deg, i may even try 2 and see how that goes
Setup:
Currently Mr-02 RML
Eagle ball diff
Kyosho carbon soft H plate
CP bearings
FERR F50 wheel set (shattered at this time, aluminums in today)
MR-01 green spring in front right, MR-01 red in front left
15 deg radials in rear
30 deg lo-pro in front
Kyosho Oil damper
X-speed motor with 8t
__________________
ATTN SHOP OWNERS!
I will trade professional graphic design and photography services in part or whole for Mini-z's and parts. Pm me for details
the shop here has a bar that goes on the mr-02 chassis that has chamber and/ castor also.....i have one and like it...the gold one has both camber & castor the blue one only has chamber.....i think? but anyway
p.s. this bar really helped with tire wear...but i had to go up to a hard spring to cut out some bit the tire was getting....in other words it went into a oversteer condition.....and i adjusted with harder springs to bring it bach to a happy medium...
the shop here has a bar that goes on the mr-02 chassis that has chamber and/ castor also.....i have one and like it...the gold one has both camber & castor the blue one only has chamber.....i think? but anyway
then you have to do both sides, and looking at the car, i dont quite see where it goes, do you have to cut the factory kingpin arms? i wish there were knuckles so i can do the 2 sides diff.
__________________
ATTN SHOP OWNERS!
I will trade professional graphic design and photography services in part or whole for Mini-z's and parts. Pm me for details
there are knukles out there...i have a few diffent types, i got them from another shop...sorry mzr...
anyway...i just thought you would find those parts interesting......
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»