hi chris, i tried to run the multi option rear suspension as a DPS on the RR motor mount. however i found that the damper post is waaaaay to high for the bottom spring of the DPS. i end up compressing the bottom dps spring, and i don't like it. any suggestion to have both bottom and upper spring has zero pre-load?
hi chris, i tried to run the multi option rear suspension as a DPS on the RR motor mount. however i found that the damper post is waaaaay to high for the bottom spring of the DPS. i end up compressing the bottom dps spring, and i don't like it. any suggestion to have both bottom and upper spring has zero pre-load?
Flip the post upside down, or raise the damper plate or both.
__________________
Cristian Tabush
REFLEX RACING USA
10 Time Mini-Z World Champions!!! http://www.reflexracing net
I have a question about the rear shocks. Will the Atomic AWD151 set work to replace the plastic pieces? The plastic shocks are too hard to adjust, and I don't have a die kit to re-thread them. Is the alloy set any smoother? Anyone know how much more the alloy pieces weigh when compared to the plastic?
it fits just fine but the shocks are not designed to sit at any angle. basically they are designed to move straight up and down with no pivoting at all. i bought 3 sets to try this out and came up empty handed.
__________________
PN Racing
R1Wurks
LET's Go Racing
MBMZR
DG Designs
No the ball is smaller and mounts in the shock completely different from the plastic ball. The metal shock has a collar that goes on first then the shock and then the ball goes through the shock and is all tightened together with a nut. Basically the shock is sandwiched between the collar and the ball
__________________
PN Racing
R1Wurks
LET's Go Racing
MBMZR
DG Designs
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»