hopefully this will be a quick stupid question on an 01 board wich is forward and back on the fets looking in the direction of where the motor plugs in
__________________
]
Last edited by techno; 2005.07.02 at 01:35 PM.
Reason: easier to under stand
Actually I was looking for the FET, which controls the forward. The car I got from
Mystery one stack broke still has like 5 the other stack still has all 10 I was just wondering which was which so the 10 stack will be forward
Both FETs control both forward and back, the FET stacks must be the same, either 2X5, or 2X10
Actually I don't believe that to be true according the stacks that I've done. Now I haven't done any testing to see the difference in speed or what ever but I have a 3 stack of 4562 on the fwd and a 2 stack of stock chips on the rear side. I haven't had any problems going in either direction. Arch2b and Chuckyluv can vouch for that. At the last DC GTG I ran my supra without any problems except fast tire wear
To answer Technos question the Forward FET I believe are the fets directly behind the black box on the board. If you are looking at the board from the rear the fwd stack is on the right.
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»