Mini-Z, Kyosho Mini-Z Racer, MR-03, MR-02, MA-010, Forums, News, Pictures, Parts, and Shop - Mini-ZRacer.com
Forums, Mini-Z, MiniZ, Kyosho Mini-Z, Kyosho MiniZ, Kyosho Mini-Z Racer
Mini-Z Hop-Ups, Mini-Z Parts, MiniZ Hop-Ups, MiniZ Parts, Kyosho Mini-Z Hop-Ups, Kyosho Mini-Z Parts, Kyosho MiniZ Hop-Ups, Kyosho MiniZ Parts, Kyosho Mini-Z Racer Hop-Ups, Racer Kyosho Mini-Z Parts
Old 2014.12.04, 01:34 PM   #1
referjohn
REINSTATED
 
referjohn's Avatar
 
Join Date: Jan 2006
Location: Santa Rosa, CA
Posts: 173
How do I test cells.

Well I want to know how to test cells. I have 3 multi meters.
Whats a good way to know your resistance?
I set my meter to OHM right?
Do I test it full charged, or half charged, or discharged?

Is there a certain reading ( OHM VALUE or Resistance) # that's within
Specs that I should be looking for?

And what is the Bad reading ( OHM VALUE or Resistance) # that falls
Out of spec and the cell needs to be discarded.
Thanks in advance
John
__________________
Thank You MINI-ZRACER.COM
referjohn is offline   Reply With Quote
Old 2014.12.04, 10:37 PM   #2
imxlr8ed
Registered User
 
imxlr8ed's Avatar
 
Join Date: Sep 2004
Location: Reading Pa.
Posts: 4,124
Measuring Battery Internal Resistance: http://youtu.be/HZUDFcOSe48

Best answer I could find.

Honestly, I treat my cells like dirt. I used to be a bit obsessive about my sets (though not nearly as much as some in the hobby) but then I just kinda got lazy with it. New cells are always better than ones that are 2 or 3 years old, try to keep sets together as much as possible but if they start to feel weak, I feel it doesn't really hurt to just mix them up a bit. Usually I'll just keep an eye on my charger and wait to see which one out of a set takes longer to charge, I'll pull that one out of that set and put it with the other weak ones. Then I'll take the ones that charged the quickest and keep those in a pile. Then I just make new sets from those piles, weak sets and strong sets.

I know, not very scientific and probably wrong way to go about it but I have run fresh bought matched sets in the past and any advantage they may have given me was easily erased by one or two driving errors. Some of my cells sets are more than 2 years old but I did just give in and get around 8 new sets just to spruce up the battery box.

I'm sure others will be along soon with much better methodologies for you to utilize.
__________________
My Online Design Studio and Shop!

http://www.shapeways.com/shops/UID

http://www.howfastareyou.com

SUPPORT LBR!!!
(Local Basement Racing)
imxlr8ed is offline   Reply With Quote
Old 2014.12.05, 09:19 AM   #3
referjohn
REINSTATED
 
referjohn's Avatar
 
Join Date: Jan 2006
Location: Santa Rosa, CA
Posts: 173
Thanks for your input, let me also say....I forgot to mention
I am running over the counter Duracell 800s or 900s, so nothing fancy there. I love the real world truth about driver errors negated top batteries.
Agree.

And my charger is also a doozy...... a OTHC,Duracell 30 +\- charger
I have had since my mr01 .
I don't race.

Thanks again
__________________
Thank You MINI-ZRACER.COM
referjohn is offline   Reply With Quote
Old 2014.12.05, 01:33 PM   #4
arch2b
Moderator
 
arch2b's Avatar
 
Join Date: Sep 2002
Location: Washington, DC
Posts: 35,480
Send a message via AIM to arch2b
i'm with ed. lucky to get my cells charged before the next race day... if i'm feeling really ambitious, i cycle them before the next race day. other than that, i just charge and go. i know proper care and sorting can make a difference but in the end, i just don't have the patience, energy or desire to cater to cell management with my valuable free time. my priority is to keep my car moving on the track vs. making sure my cells are matched, cycled, etc.
arch2b is offline   Reply With Quote
Old 2014.12.05, 02:49 PM   #5
imxlr8ed
Registered User
 
imxlr8ed's Avatar
 
Join Date: Sep 2004
Location: Reading Pa.
Posts: 4,124
I linear charge 4 cells at 1.2 amps on my PN chargers, and then I have Duracell 30* min chargers to charge cells individually at 1.7 amps. I have the 1 amp discharge function in the PN chargers and I also have the PN discharge trays.

My favorite discharger is the three automotive taillight bulbs soldered together and a Radioshack AAA tray for 4 cells. I used to have a Reedy cutoff on it but now I just watch the bulbs until they are just about completely dim. Dumps the set at around 3 amps.

Now if I was running twice a week and my cells were constantly being cycled like in the old days, I'd be paying more attention to my battery scenario but for now, it's not totally necessary.
__________________
My Online Design Studio and Shop!

http://www.shapeways.com/shops/UID

http://www.howfastareyou.com

SUPPORT LBR!!!
(Local Basement Racing)

Last edited by imxlr8ed; 2014.12.05 at 06:32 PM. Reason: *thought they were 15s, my chargers are the 30s
imxlr8ed is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
M.H.S. Racing Discussion HobbyShopOwner Mini Z Racing, Maj's Hobby Shop, Saddle Brook NJ 9983 2016.07.02 01:25 AM
R1wurks 750mah Ultra High Output AAA R1WURKS Batteries, Chargers and Dischargers 47 2010.08.11 04:11 PM
R1WURKS Exclusive Matched & Graded Racing Cells WOW! NOMOTORLIMIT Batteries, Chargers and Dischargers 13 2008.06.01 09:41 PM
Maha MH-C9000 WizardOne Charger-Analyzer for 4 AA / AAA rkk Batteries, Chargers and Dischargers 51 2007.08.02 03:49 PM


All times are GMT -5. The time now is 05:13 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2011 Mini-ZRacer.com
Mini Inferno Sale - Up to $85 Instant Savings!
Micro-T Hop-Ups
RC18R, M18, Micro RS4, Mini-LST, TamTech-Gear, Minizilla, RC18T, RC18B, RC18MT
shop.tinyrc.com Products

more»
Tiny RC Community News
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated. The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year.  Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All! Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»
Mini-Z, Mini-Z Racer, MR-02, MA-010
M18, M18T, RC18T, Mini-LST, Mini-T, Micro RS4, XRay, 1/18, 18th scale
XMODS, XMOD, Micro Flight, ZipZaps, ZipZaps SE, Bit Char-G, MicroSizers, TTTT, Plantraco Desktop Rover, SuperSlicks, Digi Q
Mini Inferno, Mini Inferno ST, half EIGHT, 1/16, 16th scale
Epoch, Indoor Racer, 1/43, 43rd scale
E-Savage, eSavage, eZilla, e-Zilla, HPI
Robots, Bots, Bipeds, Wheeled, Manoi, Roomba, NXT, Lego, Hacking
Crawling, Crawlers, Micro, RC, Losi Mini-Rock Crawler, Duratrax Cliff Climber
Kyosho Minium, Caliber 120, Minium Forums
Mini-Z Hop-Ups, Mini-Z Parts, Mini Inferno Hop-Ups, Mini Inferno Parts, M18 Hop-Ups, M18 Parts