hi
i just got the iwaver light kit but i dont know what is the right way to hook it up. I've had experience with other lights before and the no-brainer way to hook it up directly to the battery terminal. But am i suppose to attach this one to the motor leads? I want to have it so that the front light stays on and the rear dims when being driven. Is there a way to do that?
also, it really annoys me how there is not connector between the light kit pcb and the wires. This means i cant take off the body to work on my car
Yes, the leads connect to the PCB at the same point as the motor does.
No you can't have the front headlights stay on unless you map the board and figuer out where the circuit is for the front LEDs and wire a hot wire to it some where, the easiest would be where the wires solder to the board bypassing it.
You can take the body off, it just sits in the way. You could always do what i did with my Police R34 and buy some Deans mini plugs or other brand of mini plug and cut the leads and solder in the plugs, then you'll be able to disconnect the body from the chassis.
__________________
Mini-z collection: None, but looking to buy
My minizracer gallery:saiyan's paddock
Local Club Website: www mini-az.com
Kamehamehaaaaa!!!!!! Rallye racers are the originators of drift Speedchannel on-line rocks!!
Ive been thinking about a way to do the same thing with the dimming lights, i have been thinking of taking an Xmods CLL kit and just re-working the plus to install as such like the Iwaver light kit. But since i dont have a Xmods CLL kit im sorta out of luck.
Even though i have to unplug it to turn it off, and when i gun it, the light dims, i just directly attached it to the battery tabs(where the pcb gets power)
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»