Mini-Z, Kyosho Mini-Z Racer, MR-03, MR-02, MA-010, Forums, News, Pictures, Parts, and Shop - Mini-ZRacer.com
Forums, Mini-Z, MiniZ, Kyosho Mini-Z, Kyosho MiniZ, Kyosho Mini-Z Racer
Mini-Z Hop-Ups, Mini-Z Parts, MiniZ Hop-Ups, MiniZ Parts, Kyosho Mini-Z Hop-Ups, Kyosho Mini-Z Parts, Kyosho MiniZ Hop-Ups, Kyosho MiniZ Parts, Kyosho Mini-Z Racer Hop-Ups, Racer Kyosho Mini-Z Parts
Old 2002.01.20, 08:32 AM   #1
Mondo
Mini-Zedologist - Fear me
 
Mondo's Avatar
 
Join Date: Dec 2001
Location: Bristol, England
Posts: 3,610
Race Ready chassis with Upright Motor Mount

Here's a pic of a race ready Mini-Z chassis.
This uses a standard motor mount in the 'upright' position

The front has been lowered by 1.4mm
It has an Eagle/TopCAD 2 toe-in bar and a Kyosho anti-roll suspension top bar. It uses soft springs up front.

The rear has been dropped by 1.2mm and it's fitted with an Eagle/TopCAD 'soft' GRP H-Plate. No rear shock due to bodyshell space limitations.

Power is supplied by a Kyosho X-Speed motor, a 7T pinion.
full bearing kit and Eagle/TopCAD ball diff. An alloy heatsink/motor clip has been fitted too.

Wheels are Eagle 'Cyclone' directional wheels with 30 rubber and wider rears. You may notice pseudo disc brakes lurking within the alloy wheels
Attached Images
File Type: jpg pict0055.jpg (29.4 KB, 479 views)

Last edited by Mondo; 2002.01.20 at 12:45 PM.
Mondo is offline   Reply With Quote
Old 2002.01.20, 12:47 PM   #2
Mondo
Mini-Zedologist - Fear me
 
Mondo's Avatar
 
Join Date: Dec 2001
Location: Bristol, England
Posts: 3,610
Just to let you know

This Post is just to show that there has been a posting here

Mondo
__________
Mondo is offline   Reply With Quote
Old 2002.07.17, 02:17 PM   #3
one2eightd
Mini-Z Pro
 
Join Date: Jul 2002
Posts: 69
Send a message via AIM to one2eightd
Where did you buy that mount I like the idea behind it.
one2eightd is offline   Reply With Quote
Old 2002.07.17, 03:08 PM   #4
Mondo
Mini-Zedologist - Fear me
 
Mondo's Avatar
 
Join Date: Dec 2001
Location: Bristol, England
Posts: 3,610
Upright Motor Mount

one2eightd

That is a standard motor mount in an upright position.
Refer to the Mini-Z Racer Manual on how to set the standard motor mount in an upright position.
__________________
Mondo
__________

The UberMod is back in town...
Mondo is offline   Reply With Quote
Old 2002.07.18, 09:33 AM   #5
one2eightd
Mini-Z Pro
 
Join Date: Jul 2002
Posts: 69
Send a message via AIM to one2eightd
Wow, I knew that I feel stupid now. For some reason I thought the mount was anodized aluminum like the wheels and motor.
one2eightd is offline   Reply With Quote
Old 2002.07.18, 01:44 PM   #6
Mondo
Mini-Zedologist - Fear me
 
Mondo's Avatar
 
Join Date: Dec 2001
Location: Bristol, England
Posts: 3,610
one2eightd

Hehehe, perhaps it was the alloy heatsink motor-clip that got you there?
__________________
Mondo
__________

The UberMod is back in town...
Mondo is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: RTR Race Ready MR02 with many hop ups! minizforever Mini-Z Marketplace 15 2008.04.10 05:40 PM
Race Event - Saturday - 03/08/08 - ALTERNATE LOCATION! AtlRC Atlanta Mini Scale Racing 9 2008.03.14 10:29 AM
Mini-Car Club of Canada (Toronto) Jun 17th Race Sinister_Y Events 1 2006.06.18 05:59 PM
Check out my custom Pro-Z chassis! efsee Aftermarket Chassis 9 2003.08.07 08:26 AM
Race Weary Ferrari 360 chassis FenDer BenDer Chassis 2 2002.05.04 09:54 PM


All times are GMT -5. The time now is 12:48 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2011 Mini-ZRacer.com
Mini Inferno Sale - Up to $85 Instant Savings!
Micro-T Hop-Ups
RC18R, M18, Micro RS4, Mini-LST, TamTech-Gear, Minizilla, RC18T, RC18B, RC18MT
shop.tinyrc.com Products

more»
Tiny RC Community News
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated. The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year.  Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All! Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»
Mini-Z, Mini-Z Racer, MR-02, MA-010
M18, M18T, RC18T, Mini-LST, Mini-T, Micro RS4, XRay, 1/18, 18th scale
XMODS, XMOD, Micro Flight, ZipZaps, ZipZaps SE, Bit Char-G, MicroSizers, TTTT, Plantraco Desktop Rover, SuperSlicks, Digi Q
Mini Inferno, Mini Inferno ST, half EIGHT, 1/16, 16th scale
Epoch, Indoor Racer, 1/43, 43rd scale
E-Savage, eSavage, eZilla, e-Zilla, HPI
Robots, Bots, Bipeds, Wheeled, Manoi, Roomba, NXT, Lego, Hacking
Crawling, Crawlers, Micro, RC, Losi Mini-Rock Crawler, Duratrax Cliff Climber
Kyosho Minium, Caliber 120, Minium Forums
Mini-Z Hop-Ups, Mini-Z Parts, Mini Inferno Hop-Ups, Mini Inferno Parts, M18 Hop-Ups, M18 Parts