Mini-Z, Kyosho Mini-Z Racer, MR-03, MR-02, MA-010, Forums, News, Pictures, Parts, and Shop - Mini-ZRacer.com
Forums, Mini-Z, MiniZ, Kyosho Mini-Z, Kyosho MiniZ, Kyosho Mini-Z Racer
Mini-Z Hop-Ups, Mini-Z Parts, MiniZ Hop-Ups, MiniZ Parts, Kyosho Mini-Z Hop-Ups, Kyosho Mini-Z Parts, Kyosho MiniZ Hop-Ups, Kyosho MiniZ Parts, Kyosho Mini-Z Racer Hop-Ups, Racer Kyosho Mini-Z Parts
Old 2005.03.18, 09:45 PM   #1
arch2b
Moderator
 
arch2b's Avatar
 
Join Date: Sep 2002
Location: Washington, DC
Posts: 35,480
Send a message via AIM to arch2b
Vital Statistics

Everyone wants a better shop, Mini-z is comitted to developing one. We are asking for member participation in the collection of vital statistics for every mini-z.

with the recent purchase of the mustang autoscale, i noticed for the first time kyosho is providing post card sized pamphlets with the vital statistics for that autoscale. as this is a new feature, we would like to apply it retroactively to all the previous autoscales as we believe this information will be of great benifit to anyone who ever searched the shop.

in the interest of being as brief and to the point we have reduced the amount of information to the following:

Quote:
(filled in for example)
ASC part number(s): MZG205MB / MZG205MG
RTR part number(s): 30461
Type of chassis: MR-02 MM
Wheelbase: LL
Suspension limiter: 5
Wheel set part number: MZH215S
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: W
Rear wheel offset: 1mm
Front chassis width: 70mm
Rear chassis width: 72mm
Receiver antenna D size: 30mm
if you have require clarification on what we are asking for, i have attached the card that was supplied with my mustang as an example.

if you received one of these cards with your readyset or autoscale, please post this information.

if your really bored, you can find alot of this information in existing documents such as your manual, autoscale pamphlets and kyosho pdf's you can download such as the wheel chart.

the more submissions we have, the better you and others will be informed whe searching the shop.

PLEASE, only post this info.
Attached Images
File Type: jpg mr-02 mm ford mustang.JPG (167.7 KB, 173 views)
arch2b is offline   Reply With Quote
Old 2005.03.20, 05:31 AM   #2
HammerZ
Master of Thrash
 
HammerZ's Avatar
 
Join Date: Oct 2002
Location: Arkansas
Posts: 4,980
Send a message via MSN to HammerZ
I did one for the Lancia Stratos, because it is somewhat unusual. There are a few N/A's in the listing, and added the motor position to the list. I am suprised it is listed as low. I also made the list into a text file template that can be used to fill out.


Lancia Stratos

ASC part number(s): MZC16MC/ MZC16SR
RTR part number(s): 30134
Type of chassis: MR01
Wheelbase: S
Motor mount position: Low
Suspension limiter: N/A
Wheel set part number: MZ26
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: W
Rear wheel offset: 0mm
Front chassis width: N/A
Rear chassis width: N/A
Receiver antenna D size: 15mm
Attached Files
File Type: txt ASC Info Template.txt (291 Bytes, 63 views)
__________________

Last edited by HammerZ; 2005.03.20 at 05:52 AM.
HammerZ is offline   Reply With Quote
Old 2005.03.20, 08:19 AM   #3
HammerZ
Master of Thrash
 
HammerZ's Avatar
 
Join Date: Oct 2002
Location: Arkansas
Posts: 4,980
Send a message via MSN to HammerZ
I didn't list the limiter, because the 01 don't have them. The width I riffled through five different sheets and did not find that listed anyplace. If I had to guess, I'd say front 65mm, rear 70mm.
__________________
HammerZ is offline   Reply With Quote
Old 2005.03.20, 08:49 AM   #4
HammerZ
Master of Thrash
 
HammerZ's Avatar
 
Join Date: Oct 2002
Location: Arkansas
Posts: 4,980
Send a message via MSN to HammerZ
I guessed on the chassis width again. These two had the cards with them. I am still looking for others.

Lotus Europa.

ASC part number(s): MZG40G/ MZG40BK/ MZG40CW
RTR part number(s): 30358
Type of chassis: MR01F
Wheelbase: M
Suspension limiter: N/A
Wheel set part number: MZH104C
Tire set part number: MZT100C-F
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: N
Rear wheel offset: 0mm
Front chassis width: 65mm
Rear chassis width: 65mm
Receiver antenna D size: 20mm


McLaren F1

ASC part number(s): MZG203
RTR part number(s): 30457
Type of chassis: MR02 MM
Wheelbase: LL
Suspension limiter: 5
Wheel set part number: MZH213
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: W
Rear wheel offset: 0mm
Front chassis width: 70mm
Rear chassis width: 70mm
Receiver antenna D size: 5mm
__________________

Last edited by HammerZ; 2005.03.20 at 09:13 AM.
HammerZ is offline   Reply With Quote
Old 2005.03.20, 09:21 AM   #5
HammerZ
Master of Thrash
 
HammerZ's Avatar
 
Join Date: Oct 2002
Location: Arkansas
Posts: 4,980
Send a message via MSN to HammerZ
This one I used a sheet from my white body set. There are some holes in this.

R32 Skyline GT-R

ASC part number(s): MZB23
RTR part number(s): N/A
Type of chassis: MR01
Wheelbase: L
Motor pod setting: Low
Suspension limiter: N/A
Wheel set part number: MZ40/ MZ41GM
Front wheel width: N
Front wheel offset: 1.5mm
Rear wheel width: W
Rear wheel offset: -1mm
Front chassis width: N/A
Rear chassis width: N/A
Receiver antenna D size: 35mm


Ferrari F40

ASC part number(s): MZB19
RTR part number(s): N/A
Type of chassis: MR01
Wheelbase: M
Motor pod setting: Low
Suspension limiter: N/A
Wheel set part number: MZ30
Front wheel width: N
Front wheel offset: 2.5mm
Rear wheel width: W
Rear wheel offset: 2mm
Front chassis width: N/A
Rear chassis width: N/A
Receiver antenna D size: 20mm
__________________

Last edited by HammerZ; 2005.03.20 at 09:27 AM.
HammerZ is offline   Reply With Quote
Old 2005.03.20, 09:31 AM   #6
arch2b
Moderator
 
arch2b's Avatar
 
Join Date: Sep 2002
Location: Washington, DC
Posts: 35,480
Send a message via AIM to arch2b
thanks for your efforts hammer. i guess not to many others have the time or inclination to contribute.

obviously not all the info can or could be found on some of these so there enevitabley be some holes but over time i'm sure they will be filled.

motor position is applicable to mr-01's which are no longer marketed by kyosho. the move to the mr-015 eliminates the need for motor position execpt for those very few mr-01's that require the high mount which can be noted by whomever posts the info.

ok, we can't let hammer get them all can we there are tons of bodies nad tons of members.... if we could even get each to do just one we would have them all very quickly. ofcourse those like hammer make it much easier please contribute and other than my ramblings, lets keep the posting applicable to the information, follow hammer's example
arch2b is offline   Reply With Quote
Old 2005.03.21, 01:53 PM   #7
HammerZ
Master of Thrash
 
HammerZ's Avatar
 
Join Date: Oct 2002
Location: Arkansas
Posts: 4,980
Send a message via MSN to HammerZ
Here are the PDF's that I found on some of the older cars that I was using. My brain is starting to itch.
Attached Files
File Type: pdf body_manual_info.pdf (118.9 KB, 33 views)
File Type: pdf Wheel chart.pdf (278.6 KB, 46 views)
__________________
HammerZ is offline   Reply With Quote
Old 2005.03.21, 02:17 PM   #8
Ninja
Mechanic
 
Ninja's Avatar
 
Join Date: Jul 2004
Location: Chatsworth, GA
Posts: 3,577
Send a message via MSN to Ninja Send a message via Yahoo to Ninja
i wish they had nose mount info with them too, like which bodies can interchange without changing the nose mount plates i know the NSX and the CLK can use the same mount, but dont know about any others
__________________
Real Racers Do It Sideways.
PETA=People Eating Tastey Animals
those two chicks over there, not so hot. Dont get me wrong, I would still go for it, cause thats the type of equal opportunity guy I am.
I am a FIRM believer in "Run what ya brung"......Unless it's your MOUTH!!!
Ninja is offline   Reply With Quote
Old 2005.03.21, 02:21 PM   #9
HammerZ
Master of Thrash
 
HammerZ's Avatar
 
Join Date: Oct 2002
Location: Arkansas
Posts: 4,980
Send a message via MSN to HammerZ
I figure the nosemounts are specific to the body. Every one I've seen has the car name molded onto it.
__________________
HammerZ is offline   Reply With Quote
Old 2005.03.21, 02:34 PM   #10
Ninja
Mechanic
 
Ninja's Avatar
 
Join Date: Jul 2004
Location: Chatsworth, GA
Posts: 3,577
Send a message via MSN to Ninja Send a message via Yahoo to Ninja
Quote:
Originally Posted by HammerZ
I figure the nosemounts are specific to the body. Every one I've seen has the car name molded onto it.
yeah they have the body name molded to the plates to make it less confusing for beginners swapping bodies, i know the NSX and CLK are interchangeable, and i think the Skyline GT-R and Porche GT3 are as well. i was just thinking that it would make things easier for some people, and nice info to have, some companies sell aluminum nose mounts for some bodies, but for the bodies i have i dont see any aluminum available, but if i could find an aluminum mount that will fit a couple different bodies i have it would appeal to me more to buy one
__________________
Real Racers Do It Sideways.
PETA=People Eating Tastey Animals
those two chicks over there, not so hot. Dont get me wrong, I would still go for it, cause thats the type of equal opportunity guy I am.
I am a FIRM believer in "Run what ya brung"......Unless it's your MOUTH!!!
Ninja is offline   Reply With Quote
Old 2005.03.21, 02:54 PM   #11
arch2b
Moderator
 
arch2b's Avatar
 
Join Date: Sep 2002
Location: Washington, DC
Posts: 35,480
Send a message via AIM to arch2b
if you know for fact (personal experience etc.) that some nose clips are interchangeable, please start a list here as well which can be updated etc.

lets keep the chat to a min. so the real beauty of this thread can be seen more easily, that includes myself i tend to ramble...
arch2b is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
XRL Regoinal Championship for Xmods" ppl Who are entering" put statistics of ur xmods Hondatunerz2002 Mini RC 16 2004.07.15 04:50 PM


All times are GMT -5. The time now is 04:43 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2011 Mini-ZRacer.com
Mini Inferno Sale - Up to $85 Instant Savings!
Micro-T Hop-Ups
RC18R, M18, Micro RS4, Mini-LST, TamTech-Gear, Minizilla, RC18T, RC18B, RC18MT
shop.tinyrc.com Products

more»
Tiny RC Community News
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated. The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year.  Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All! Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»
Mini-Z, Mini-Z Racer, MR-02, MA-010
M18, M18T, RC18T, Mini-LST, Mini-T, Micro RS4, XRay, 1/18, 18th scale
XMODS, XMOD, Micro Flight, ZipZaps, ZipZaps SE, Bit Char-G, MicroSizers, TTTT, Plantraco Desktop Rover, SuperSlicks, Digi Q
Mini Inferno, Mini Inferno ST, half EIGHT, 1/16, 16th scale
Epoch, Indoor Racer, 1/43, 43rd scale
E-Savage, eSavage, eZilla, e-Zilla, HPI
Robots, Bots, Bipeds, Wheeled, Manoi, Roomba, NXT, Lego, Hacking
Crawling, Crawlers, Micro, RC, Losi Mini-Rock Crawler, Duratrax Cliff Climber
Kyosho Minium, Caliber 120, Minium Forums
Mini-Z Hop-Ups, Mini-Z Parts, Mini Inferno Hop-Ups, Mini Inferno Parts, M18 Hop-Ups, M18 Parts