I didn't want to revive the 3 year old tri damper thread, so I am posting my question here:
I am currently running the MR2994C tri damper setup for 94mm with the MR2995 motor mount, MR2161 dual spring center shock, and MR2061 disc damper.
However, I would like to try running this setup in 98mm. From what I can tell, the only new part I would need is this, the MR3399G damper plate, correct? It appears to be very similar as the damper plate I am using, except it has an extra set of holes allowing me to set the motor pod further away. It also looks like if I use the inner set of mounting holes I can also use the plate at 94mm. Can anyone confirm this for me?
Alternatively, would this Reflex Racing plate RX1168 work in the same way? I am using the PN racing dual spring center shock and I am uncertain if that will fit properly, as well as allowing me to use both a 94mm and a 98mm (PN-based) tri shock setup.
I didn't want to revive the 3 year old tri damper thread, so I am posting my question here:
I am currently running the MR2994C tri damper setup for 94mm with the MR2995 motor mount, MR2161 dual spring center shock, and MR2061 disc damper.
However, I would like to try running this setup in 98mm. From what I can tell, the only new part I would need is this, the MR3399G damper plate, correct? It appears to be very similar as the damper plate I am using, except it has an extra set of holes allowing me to set the motor pod further away. It also looks like if I use the inner set of mounting holes I can also use the plate at 94mm. Can anyone confirm this for me?
Alternatively, would this Reflex Racing plate RX1168 work in the same way? I am using the PN racing dual spring center shock and I am uncertain if that will fit properly, as well as allowing me to use both a 94mm and a 98mm (PN-based) tri shock setup.
With the 2 top pictures every thing is there to run 94/98 set up94 is the forward position and 98 would be the rear position the same for the dual shock
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»