We are proud to announce our new knuckles which is an important step in mini racing. This step involves both performance and also cost efficiency.
Features of our new knuckles
- Teflon insert to reduce friction
- Multi offset with a single knuckle
- Standart, ball end and balllink linkage options
- Overtighten proof structure.
With these new knuckles you will be able create 0,1,2,3 degrees of offset with a single set.
Due to special spacers between and outsides of the ballbearings you will tighten your lucknut as much as you want and your tires will still spin freely.
Thread on the linkage will give you the ability to use this knuckles not only conventional way but also with ball links.
Demonstration of this knuckle will be live here and also at www.tgr.com.tr within this week.
Stay tuned for more info on this product and other new products of TGR which will be announced soon.
We are proud to announce our new knuckles which is an important step in mini racing. This step involves both performance and also cost efficiency.
Features of our new knuckles
- Teflon insert to reduce friction
- Multi offset with a single knuckle
- Standart, ball end and balllink linkage options
- Overtighten proof structure.
With these new knuckles you will be able create 0,1,2,3 degrees of offset with a single set.
Due to special spacers between and outsides of the ballbearings you will tighten your lucknut as much as you want and your tires will still spin freely.
Thread on the linkage will give you the ability to use this knuckles not only conventional way but also with ball links.
Demonstration of this knuckle will be live here and also at www.tgr.com.tr within this week.
Stay tuned for more info on this product and other new products of TGR which will be announced soon.
Is this an option or included in the Sinister Pro?
thanks
Is this an option or included in the Sinister Pro?
thanks
First sorry for the delay on the release pictures of the product.
Problem is with the photos. I guess I will be able to describe the system from the CAD drawings but photo shooting of the knuckle pieces are really hard.
Meanwhile these knuckles already left the production line send to dealers with their latest orders.
Best part is; this is not an option. This part exists in all kits that knuckle is included (ie Sinister, Sinister PRO)
There are 1mm and 2mm shim on the wheel shaft. Copper color is for 2mm and the other is 1mm. You can also put a 1mm washer between the ball bearings. Most wheels has 1mm gap between ball bearings. If this is the case then you can tighten the locknut as much as you can to secure but wheels will spin freely.
Wheel shaft is longer then ordinary ones and you can play with the washers places to create 0,1,2,3 degrees of offset.
Shaft for steering rod is m2 screw which screwed from below. You can remove this and install a ball there easily.
White part which is supposed to be around the king pin is made of Teflon, which create perfect smoothness. It has a lower impact resistancy comparing to delrin but it is much more smooth so we opted for teflon.
Body is cnc machined from 7075 T6 aliminum and polished with natural color.
Hope this clarifies the product and we'll update this threas as soon as we have nice photos
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»