Mini-Z, Kyosho Mini-Z Racer, MR-03, MR-02, MA-010, Forums, News, Pictures, Parts, and Shop -
Forums, Mini-Z, MiniZ, Kyosho Mini-Z, Kyosho MiniZ, Kyosho Mini-Z Racer
Mini-Z Hop-Ups, Mini-Z Parts, MiniZ Hop-Ups, MiniZ Parts, Kyosho Mini-Z Hop-Ups, Kyosho Mini-Z Parts, Kyosho MiniZ Hop-Ups, Kyosho MiniZ Parts, Kyosho Mini-Z Racer Hop-Ups, Racer Kyosho Mini-Z Parts
Old 2008.01.17, 09:56 AM   #1
Registered User
briankstan's Avatar
Join Date: Feb 2005
Location: West Jordan, Utah
Posts: 6,877
Salt Lake Mini-Z Racing Regulations

General rules

Lap counting - Will be done with our Corespeedway lap counter

General conduct - We expect all drivers to treat each other with courtesy and respect. Try to race clean and don't crash or block other drivers intentionally. Try to keep emotions in check. This is all for fun, no reason to get upset and be verbally or otherwise abusive. Anybody who is abusive may be suspended or removed from the club.

Attendance - We don't have any minimum participation rules, come once every few months or every race, it's okay. However, since we do have a lot of racing to do in one night please show up on time, or we may have to start without you. If we do start without you, don't take it personal, you can join in the fun at whatever point you show up.

Marshaling - You are expected to marshal your own car. Another driver may be nice and help you out or there may even be non-drivers available to marshal, but don't expect it. If there are others available to marshal please don't yell at them if they aren't moving as fast as you'd like them to.

Mini-Z - Stock
Motor: PN Speedy, Xspeed, HFAY Stock, Kyosho Stock. New club members are required to run the stock motor until given permission to upgrade. The stock motor is plenty fast and alot easier to learn to drive with. If you feel you are ready please discuss with Brian.
PCB: Stock (allowed to upgrade to the 3010 Fets) No other modifications allowed. The New 2.4ghz Chassis will be allowed when it's released.
Drive train: Any gears, shafts or diffs allowed.
Bearings: Allowed, any brand or type. (Rear axle, front wheels only.)
Chassis: Stock, direct replacement alloy parts allowed.
Tires/wheels: No Foams, No traction compounds allowed.
Suspension: Anything goes as long as the stock configuration and stock chassis are maintained.
Body: Any Kyosho Mini-z, Iwaver, or Xmod bodies. Custom model car bodies allowed as long as they meet the stock dimensions. No Lexan bodies.
Batteries: Any rechargeable NI-MH 1.2volt, or 1.25volt Alkaline (4 cells only)

Racing rules: Road course racing. 3 minute qualifying, followed by a 8 minute and a 12
minute race. # of Mains depends on participation. Driver that completes the highest total number of laps wins.

Formula 1
Motor: PN speedy 05 or Kyosho x-speed.
Drive Train: Any Gears, shafts or diffs allowed.
Chassis: Stock Direct replacement alloy parts allowed.
Tires/wheels: No Foams, No traction compounds allowed.
Suspension: Any spring or Carbon Fiber Plates.
Custom bodies: Kyosho F1 body, or Custom Painted White body.
Batteries: Any rechargeable NI-MH 1.2volt, or 1.25volt Alkaline (4 cells only)

Racing rules: 8 minute timed race. The highest total number of laps wins.

Motor: Stock
Drive train: Ball diffs, lockplates and delrin main gears allowed.
Chassis: Stock, colored chassis allowed, any alloy parts are allowed.
Tires/wheels: Any.
Suspension: Any.
Bodies: Custom bodies allowed if they meet stock dimensions.
Batteries: Any rechargeable NI-MH 1.2volt, or 1.25volt Alkaline (4 cells only)

Racing rules: 8 minute timed race. The highest total number of laps wins.

Monster Truck Race
General: Must be a Venom Mini Giant, Trinity Clash or Kyosho Mini monster.
Motor: Any
Drivetrain: Stock. Differentials may be locked.
Chassis: Stock, only minor modifications allowed
Tires/wheels: Stock
Suspension: Any shocks allowed. No other mods allowed except alloy parts on the Mini monster. Steering modifications allowed on the Mini Giant.
Body: Any
Batteries: Any 4-7 cells

Racing Rules - Trucks run on separate but identical courses or a chase type course. At least two tires must go over every obstacle during the run. If an obstacle is missed the truck must go back and go over the obstacle, otherwise the run does not count. No marshalling. If a truck turns over, gets stuck or is otherwise unable to continue that racer
forfeits that round. If both trucks are unable to finish, we re-run that round. Hitting a cone is not a penalty, however the truck must go around the cone. First truck to cross the finish line of it's course while hitting every obstacle with both wheels and rounding the cones wins that round.

Race format: Races - Each truck will have 3 rounds against every truck that is participating. 1 point will be scored for each round that is won. The points will be scored for the racing season. the driver with the heighest total points for that season will be crowned the Monster Truck champion for that Season.

Race format: Freestyle - Each driver will have a 1 minute timed session, During this time the driver will score 1 point per obsticale that is completed. Obsticles can include several different styles of Jumps, Crunshable paper cars, buses, etc. The Driver that aquires the highest total of points during the 1 minute session wins the event. In the event that the truck flips or can't move, the driver can marshal the truck 1 time, if the truck becomes undriveable again the trial is suspended, points earned still count toward the drivers total. In the event that there is a tie, the top finishers will have a second session. the driver with the heighest points total after the second session wins.
--Salt Lake Mini-Z---HFAY---MZR Gallery--

Last edited by briankstan; 2008.01.18 at 11:38 PM.
briankstan is offline   Reply With Quote


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Salt Lake Mini-Z Club Forums briankstan Salt Lake Mini-Z 3 2008.02.28 02:39 PM
Mini Z racing in the Keys! xoxide Tracks and GTGs 4 2008.02.02 08:02 PM
New Mini Z FULL 3d Racing game Pro-Z Racing Parts and Hop-ups 22 2007.12.18 08:26 AM
Atlanta Mini Scale Racing Announcement AtlRC Atlanta Mini Scale Racing 43 2006.02.19 07:52 AM
Mini Z vs Colt Mini Justin Miscellaneous Discussion 71 2002.01.18 07:31 AM

All times are GMT -5. The time now is 03:43 AM.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2011
Mini Inferno Sale - Up to $85 Instant Savings!
Micro-T Hop-Ups
RC18R, M18, Micro RS4, Mini-LST, TamTech-Gear, Minizilla, RC18T, RC18B, RC18MT Products

Tiny RC Community News
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated. The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year.  Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] Have You... : Hey All! Just a quick reminder to everyone that we post all of our Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»
Mini-Z, Mini-Z Racer, MR-02, MA-010
M18, M18T, RC18T, Mini-LST, Mini-T, Micro RS4, XRay, 1/18, 18th scale
XMODS, XMOD, Micro Flight, ZipZaps, ZipZaps SE, Bit Char-G, MicroSizers, TTTT, Plantraco Desktop Rover, SuperSlicks, Digi Q
Mini Inferno, Mini Inferno ST, half EIGHT, 1/16, 16th scale
Epoch, Indoor Racer, 1/43, 43rd scale
E-Savage, eSavage, eZilla, e-Zilla, HPI
Robots, Bots, Bipeds, Wheeled, Manoi, Roomba, NXT, Lego, Hacking
Crawling, Crawlers, Micro, RC, Losi Mini-Rock Crawler, Duratrax Cliff Climber
Kyosho Minium, Caliber 120, Minium Forums
Mini-Z Hop-Ups, Mini-Z Parts, Mini Inferno Hop-Ups, Mini Inferno Parts, M18 Hop-Ups, M18 Parts