Mini-Z, Kyosho Mini-Z Racer, MR-03, MR-02, MA-010, Forums, News, Pictures, Parts, and Shop - Mini-ZRacer.com
Forums, Mini-Z, MiniZ, Kyosho Mini-Z, Kyosho MiniZ, Kyosho Mini-Z Racer
Mini-Z Hop-Ups, Mini-Z Parts, MiniZ Hop-Ups, MiniZ Parts, Kyosho Mini-Z Hop-Ups, Kyosho Mini-Z Parts, Kyosho MiniZ Hop-Ups, Kyosho MiniZ Parts, Kyosho Mini-Z Racer Hop-Ups, Racer Kyosho Mini-Z Parts
Old 2005.03.18, 09:45 PM   #1
arch2b
Moderator
 
arch2b's Avatar
 
Join Date: Sep 2002
Location: Washington, DC
Posts: 35,480
Send a message via AIM to arch2b
Vital Statistics

Everyone wants a better shop, Mini-z is comitted to developing one. We are asking for member participation in the collection of vital statistics for every mini-z.

with the recent purchase of the mustang autoscale, i noticed for the first time kyosho is providing post card sized pamphlets with the vital statistics for that autoscale. as this is a new feature, we would like to apply it retroactively to all the previous autoscales as we believe this information will be of great benifit to anyone who ever searched the shop.

in the interest of being as brief and to the point we have reduced the amount of information to the following:

Quote:
(filled in for example)
ASC part number(s): MZG205MB / MZG205MG
RTR part number(s): 30461
Type of chassis: MR-02 MM
Wheelbase: LL
Suspension limiter: 5
Wheel set part number: MZH215S
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: W
Rear wheel offset: 1mm
Front chassis width: 70mm
Rear chassis width: 72mm
Receiver antenna D size: 30mm
if you have require clarification on what we are asking for, i have attached the card that was supplied with my mustang as an example.

if you received one of these cards with your readyset or autoscale, please post this information.

if your really bored, you can find alot of this information in existing documents such as your manual, autoscale pamphlets and kyosho pdf's you can download such as the wheel chart.

the more submissions we have, the better you and others will be informed whe searching the shop.

PLEASE, only post this info.
Attached Images
File Type: jpg mr-02 mm ford mustang.JPG (167.7 KB, 173 views)
arch2b is offline   Reply With Quote
Old 2005.03.20, 05:31 AM   #2
HammerZ
Master of Thrash
 
HammerZ's Avatar
 
Join Date: Oct 2002
Location: Arkansas
Posts: 4,980
Send a message via MSN to HammerZ
I did one for the Lancia Stratos, because it is somewhat unusual. There are a few N/A's in the listing, and added the motor position to the list. I am suprised it is listed as low. I also made the list into a text file template that can be used to fill out.


Lancia Stratos

ASC part number(s): MZC16MC/ MZC16SR
RTR part number(s): 30134
Type of chassis: MR01
Wheelbase: S
Motor mount position: Low
Suspension limiter: N/A
Wheel set part number: MZ26
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: W
Rear wheel offset: 0mm
Front chassis width: N/A
Rear chassis width: N/A
Receiver antenna D size: 15mm
Attached Files
File Type: txt ASC Info Template.txt (291 Bytes, 63 views)
__________________

Last edited by HammerZ; 2005.03.20 at 05:52 AM.
HammerZ is offline   Reply With Quote
Old 2005.03.20, 08:19 AM   #3
HammerZ
Master of Thrash
 
HammerZ's Avatar
 
Join Date: Oct 2002
Location: Arkansas
Posts: 4,980
Send a message via MSN to HammerZ
I didn't list the limiter, because the 01 don't have them. The width I riffled through five different sheets and did not find that listed anyplace. If I had to guess, I'd say front 65mm, rear 70mm.
__________________
HammerZ is offline   Reply With Quote
Old 2005.03.20, 08:49 AM   #4
HammerZ
Master of Thrash
 
HammerZ's Avatar
 
Join Date: Oct 2002
Location: Arkansas
Posts: 4,980
Send a message via MSN to HammerZ
I guessed on the chassis width again. These two had the cards with them. I am still looking for others.

Lotus Europa.

ASC part number(s): MZG40G/ MZG40BK/ MZG40CW
RTR part number(s): 30358
Type of chassis: MR01F
Wheelbase: M
Suspension limiter: N/A
Wheel set part number: MZH104C
Tire set part number: MZT100C-F
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: N
Rear wheel offset: 0mm
Front chassis width: 65mm
Rear chassis width: 65mm
Receiver antenna D size: 20mm


McLaren F1

ASC part number(s): MZG203
RTR part number(s): 30457
Type of chassis: MR02 MM
Wheelbase: LL
Suspension limiter: 5
Wheel set part number: MZH213
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: W
Rear wheel offset: 0mm
Front chassis width: 70mm
Rear chassis width: 70mm
Receiver antenna D size: 5mm
__________________

Last edited by HammerZ; 2005.03.20 at 09:13 AM.
HammerZ is offline   Reply With Quote
Old 2005.03.20, 09:21 AM   #5
HammerZ
Master of Thrash
 
HammerZ's Avatar
 
Join Date: Oct 2002
Location: Arkansas
Posts: 4,980
Send a message via MSN to HammerZ
This one I used a sheet from my white body set. There are some holes in this.

R32 Skyline GT-R

ASC part number(s): MZB23
RTR part number(s): N/A
Type of chassis: MR01
Wheelbase: L
Motor pod setting: Low
Suspension limiter: N/A
Wheel set part number: MZ40/ MZ41GM
Front wheel width: N
Front wheel offset: 1.5mm
Rear wheel width: W
Rear wheel offset: -1mm
Front chassis width: N/A
Rear chassis width: N/A
Receiver antenna D size: 35mm


Ferrari F40

ASC part number(s): MZB19
RTR part number(s): N/A
Type of chassis: MR01
Wheelbase: M
Motor pod setting: Low
Suspension limiter: N/A
Wheel set part number: MZ30
Front wheel width: N
Front wheel offset: 2.5mm
Rear wheel width: W
Rear wheel offset: 2mm
Front chassis width: N/A
Rear chassis width: N/A
Receiver antenna D size: 20mm
__________________

Last edited by HammerZ; 2005.03.20 at 09:27 AM.
HammerZ is offline   Reply With Quote
Old 2005.03.20, 09:31 AM   #6
arch2b
Moderator
 
arch2b's Avatar
 
Join Date: Sep 2002
Location: Washington, DC
Posts: 35,480
Send a message via AIM to arch2b
thanks for your efforts hammer. i guess not to many others have the time or inclination to contribute.

obviously not all the info can or could be found on some of these so there enevitabley be some holes but over time i'm sure they will be filled.

motor position is applicable to mr-01's which are no longer marketed by kyosho. the move to the mr-015 eliminates the need for motor position execpt for those very few mr-01's that require the high mount which can be noted by whomever posts the info.

ok, we can't let hammer get them all can we there are tons of bodies nad tons of members.... if we could even get each to do just one we would have them all very quickly. ofcourse those like hammer make it much easier please contribute and other than my ramblings, lets keep the posting applicable to the information, follow hammer's example
arch2b is offline   Reply With Quote
Old 2005.03.20, 09:47 AM   #7
HammerZ
Master of Thrash
 
HammerZ's Avatar
 
Join Date: Oct 2002
Location: Arkansas
Posts: 4,980
Send a message via MSN to HammerZ
The Lancia body is one of those that has you wondering if you need the pod high or low. According to the listings it said low. It has to be by far the tightest Kyosho body I have seen for a Mini Z chassis. If it helps out with the shop listings, I am behind it %110.
__________________
HammerZ is offline   Reply With Quote
Old 2005.03.20, 12:27 PM   #8
Ninja
Mechanic
 
Ninja's Avatar
 
Join Date: Jul 2004
Location: Chatsworth, GA
Posts: 3,577
Send a message via MSN to Ninja Send a message via Yahoo to Ninja
i dont know if you guys wanted OL's to be listed here or not, but here is the info for the ones i have seen info for, i will get around to posting the ones for my racers once i find the books on them.

Body Name MITSUBISHI PAJERO

ASC part number(s): MVC1HM(#201), MVC1JK(#200), MVG5W(STREET WHITE), MVG5R(STREET RED)
RTR part number(s): 30261HM(#201), 30261JK(#200), 30265W(WHITE), 30265R(RED)
Type of chassis: OL
Wheelbase: B1
Suspension limiter:
Wheel set part number: MVHO1(WHITE), MVHO1AM(ALUMINUM), MVHO1CM(CHROME), MVH03(STREET)
Front wheel width: N
Front wheel offset: 0
Rear wheel width: N
Rear wheel offset: 0
Front chassis width:
Rear chassis width:
Receiver antenna D size: 13MM

Body Name BMW X5

ASC part number(s): MVG3S(SILVER), MVG3MB(METALLIC BLUE)
RTR part number(s): 30263S(SILVER), 30263MB(METALLIC BLUE)
Type of chassis: OL
Wheelbase: B2
Suspension limiter:
Wheel set part number: MVHO4
Front wheel width: N
Front wheel offset: 0
Rear wheel width: N
Rear wheel offset: 0
Front chassis width:
Rear chassis width:
Receiver antenna D size: 17MM

Body Name TOYOTA LAND CRUISER

ASC part number(s): MVC2JR(#239), NVC2S(SILVER), MVC2PW(WHITE)
RTR part number(s): 30262JR(#239), 30262S(SILVER), 30262PW(WHITE)
Type of chassis: OL
Wheelbase: B2
Suspension limiter:
Wheel set part number: MVH02R(RED), MVHO2AM(ALUMINUM), MVHO2CM(CHROME)
Front wheel width: N
Front wheel offset: 0
Rear wheel width: N
Rear wheel offset: 0
Front chassis width:
Rear chassis width:
Receiver antenna D size: 17MM
__________________
Real Racers Do It Sideways.
PETA=People Eating Tastey Animals
those two chicks over there, not so hot. Dont get me wrong, I would still go for it, cause thats the type of equal opportunity guy I am.
I am a FIRM believer in "Run what ya brung"......Unless it's your MOUTH!!!
Ninja is offline   Reply With Quote
Old 2005.03.20, 01:59 PM   #9
arch2b
Moderator
 
arch2b's Avatar
 
Join Date: Sep 2002
Location: Washington, DC
Posts: 35,480
Send a message via AIM to arch2b
we are asking for submissions for ALL mini-z's

thanks for your help ninja between the two of you we should get a nice chunk of them out of the way i really appreciate the effort
arch2b is offline   Reply With Quote
Old 2005.03.20, 08:27 PM   #10
lfisminiz
MINI-Z BODY NUT
 
lfisminiz's Avatar
 
Join Date: Mar 2003
Location: pa.
Posts: 5,028
Red face

Ill have to do some digging. All the bodies i get i ussually throw that stuff. I guess i should check it out better.
__________________
MINI-Z BODY NUT





DG DESIGNS - PN RACING - MANTISWORX
lfisminiz is offline   Reply With Quote
Old 2005.03.20, 08:30 PM   #11
arch2b
Moderator
 
arch2b's Avatar
 
Join Date: Sep 2002
Location: Washington, DC
Posts: 35,480
Send a message via AIM to arch2b
Quote:
Originally Posted by lfisminiz
Ill have to do some digging. All the bodies i get i ussually throw that stuff. I guess i should check it out better.
i've tossed all mine too, thus the reqest for submissions
arch2b is offline   Reply With Quote
Old 2005.03.20, 08:54 PM   #12
HammerZ
Master of Thrash
 
HammerZ's Avatar
 
Join Date: Oct 2002
Location: Arkansas
Posts: 4,980
Send a message via MSN to HammerZ
The funny thing is earlier I was looking for the stats on the Diablo, the papers that came with it it didn't even have it listed (it listed the McLaren). I would have had it listed here too.

The part numbers on the F40 and R32 above is the white body sets, so they need the right ASC numbers.
__________________

Last edited by HammerZ; 2005.03.20 at 08:58 PM.
HammerZ is offline   Reply With Quote
Old 2005.03.21, 12:36 PM   #13
HammerZ
Master of Thrash
 
HammerZ's Avatar
 
Join Date: Oct 2002
Location: Arkansas
Posts: 4,980
Send a message via MSN to HammerZ
Two more older ones that I found stuff on. I figure incase there is a rerelease of these. I wished I can go back and edit the others, to add numbers and such. Cross referance it with the wheel chart, some of these may have more than two/ three part numbers for them.

Nissan Skyline R34 GT-R V Spec

ASC part number(s):
RTR part number(s): 30931S/ 30931MB/ 30931R
Type of chassis: MR01
Wheelbase: L
Suspension limiter: N/A
Wheel set part number: MZ13/ MZ13C/ MZ13GM
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: N
Rear wheel offset: 0mm
Front chassis width: 65mm
Rear chassis width: 65mm
Receiver antenna D size: 30mm

Honda S2000

ASC part number(s): MZC8
RTR part number(s):
Type of chassis:MR01
Wheelbase: M
Suspension limiter: N/A
Wheel set part number: MZ22
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: N
Rear wheel offset: 0mm
Front chassis width: 65mm
Rear chassis width: 65mm
Receiver antenna D size: 23.5mm
__________________

Last edited by HammerZ; 2005.03.21 at 12:48 PM.
HammerZ is offline   Reply With Quote
Old 2005.03.21, 12:59 PM   #14
arch2b
Moderator
 
arch2b's Avatar
 
Join Date: Sep 2002
Location: Washington, DC
Posts: 35,480
Send a message via AIM to arch2b
go ahead and post the information as updates (only the updated info) and i'll see abnout getting the edit feature fixed
arch2b is offline   Reply With Quote
Old 2005.03.21, 01:31 PM   #15
HammerZ
Master of Thrash
 
HammerZ's Avatar
 
Join Date: Oct 2002
Location: Arkansas
Posts: 4,980
Send a message via MSN to HammerZ
Some more of the old MR01 cars. I found these mucking through some old PDF files on my system.


Mitsubishi Lancer Evo. VI

ASC part number(s): MZC3
RTR part number(s):30041R/ 30041S/ 30041W
Type of chassis: MR01
Wheelbase: M
Suspension limiter: N/A
Wheel set part number: MZ15/ MZ15CM
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: N
Rear wheel offset: 0mm
Front chassis width: 65mm
Rear chassis width: 65mm
Receiver antenna D size: 30mm


Subaru Impreza WRX

ASC part number(s): MZC2
RTR part number(s): 30932BK/ 30932MB/30932Y/ 30932W
Type of chassis: MR01
Wheelbase: M
Suspension limiter: N/A
Wheel set part number: MZ14GL
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: N
Rear wheel offset: 0mm
Front chassis width: 65mm
Rear chassis width: 65mm
Receiver antenna D size: 30mm


BMW Z8

ASC part number(s): MZC4
RTR part number(s):
Type of chassis: MR01
Wheelbase: L
Suspension limiter: N/A
Wheel set part number: MZ16
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: N
Rear wheel offset: 0mm
Front chassis width: 65mm
Rear chassis width: 65mm
Receiver antenna D size: 30mm


Audi TT

ASC part number(s): MZC5
RTR part number(s):
Type of chassis: MR01
Wheelbase: M
Suspension limiter: N/A
Wheel set part number: MZ17
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: N
Rear wheel offset: 0mm
Front chassis width: 65mm
Rear chassis width: 65mm
Receiver antenna D size: 15mm


Porsche 911 GT3

ASC part number(s): MZC6
RTR part number(s):
Type of chassis: MR01
Wheelbase: M
Suspension limiter: N/A
Wheel set part number: MZ21
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: N
Rear wheel offset: 0mm
Front chassis width: 65mm
Rear chassis width: 65mm
Receiver antenna D size: 30mm


Dodge Viper GTS-R

ASC part number(s): MZC7
RTR part number(s):
Type of chassis: MR01
Wheelbase: M
Suspension limiter: N/A
Wheel set part number: MZ20
Front wheel width: N
Front wheel offset: 0mm
Rear wheel width: N
Rear wheel offset: 0mm
Front chassis width: 65mm
Rear chassis width: 65mm
Receiver antenna D size: 35mm
__________________

Last edited by HammerZ; 2005.03.21 at 01:38 PM.
HammerZ is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
XRL Regoinal Championship for Xmods" ppl Who are entering" put statistics of ur xmods Hondatunerz2002 Mini RC 16 2004.07.15 04:50 PM


All times are GMT -5. The time now is 11:41 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2011 Mini-ZRacer.com
Mini Inferno Sale - Up to $85 Instant Savings!
Micro-T Hop-Ups
RC18R, M18, Micro RS4, Mini-LST, TamTech-Gear, Minizilla, RC18T, RC18B, RC18MT
shop.tinyrc.com Products

more»
Tiny RC Community News
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated. The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year.  Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All! Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»
Mini-Z, Mini-Z Racer, MR-02, MA-010
M18, M18T, RC18T, Mini-LST, Mini-T, Micro RS4, XRay, 1/18, 18th scale
XMODS, XMOD, Micro Flight, ZipZaps, ZipZaps SE, Bit Char-G, MicroSizers, TTTT, Plantraco Desktop Rover, SuperSlicks, Digi Q
Mini Inferno, Mini Inferno ST, half EIGHT, 1/16, 16th scale
Epoch, Indoor Racer, 1/43, 43rd scale
E-Savage, eSavage, eZilla, e-Zilla, HPI
Robots, Bots, Bipeds, Wheeled, Manoi, Roomba, NXT, Lego, Hacking
Crawling, Crawlers, Micro, RC, Losi Mini-Rock Crawler, Duratrax Cliff Climber
Kyosho Minium, Caliber 120, Minium Forums
Mini-Z Hop-Ups, Mini-Z Parts, Mini Inferno Hop-Ups, Mini Inferno Parts, M18 Hop-Ups, M18 Parts