I have a mr-03ve and a mb-010 50th anniversary. Im having issues with both of them. first thing I did was get the cars to roll/accelerate straight with the trim. Then, I adjusted end point by turning the cars over upside down and adjusting the end pint until I hear the servo buzzing and then go back 2 notches just to have a buffer. After all this, I find they turn more one direction than the other. Its much more noticeable on my mr03 than the buggy, but I find it weird how they both have the same issue. Which is telling me its something Im doing wrong.
My question is
1- Am I doing something wrong with the adjustments to cause this?
2- If I'm not doing something wrong, what's causing this?
3- Am I expecting too much from these small scale cars?
Thanks
The way you are adjusting the steering end points sounds very logical but on a Mini-Z I would adjust it on track by comparing the turning radius between left and right. It isn't that uncommon that the cars will turn better in one direction versus the other.
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»