Mini-Z, Kyosho Mini-Z Racer, MR-03, MR-02, MA-010, Forums, News, Pictures, Parts, and Shop - Mini-ZRacer.com
Forums, Mini-Z, MiniZ, Kyosho Mini-Z, Kyosho MiniZ, Kyosho Mini-Z Racer
Mini-Z Hop-Ups, Mini-Z Parts, MiniZ Hop-Ups, MiniZ Parts, Kyosho Mini-Z Hop-Ups, Kyosho Mini-Z Parts, Kyosho MiniZ Hop-Ups, Kyosho MiniZ Parts, Kyosho Mini-Z Racer Hop-Ups, Racer Kyosho Mini-Z Parts
Old 2015.04.11, 11:20 AM   #1
gctkaz
Registered User
 
Join Date: Jan 2012
Location: Vancouver, Canada
Posts: 271
RA-31 / MA-020 Sports receiver steering issue

I bought a RA-31 receiver for the new MA-020 Sports AWD, to replace an AM board. I got a new ASF top cover and everything fits together fine, however I have an issue with the steering.

Initially, the servo motor wants to spin only one way, unless the pot is thrown all the way to one side. When the board was installed in the car, the steering would lock all the way to the left as soon as the car was turned on (after binding to my radio). I removed the board again and connected it only to the battery terminals and found I could stop the servo motor by turning the pot all the way to one side.

I then followed the steps to centre the chassis steering found in this thread, but with the pot centred by eye.
After doing this, the servo motor will stop spinning with the pot centred, but then the servo motor only spins when the pot is thrown to one side of centre and not the other.

My radio is an EX-1UR with a FS-TM002 FlySky module. All settings are default, and throttle works. The same thing happens with the FS-TM002 connected to an Airtronics M8.

Does anyone have some hints as to what is going on?

If I can't get this sorted I will go back to AM, but the plan was to upgrade this car to FlySky 2.4GHz, and put the AM board into another Franken-roller. If I want to run both cars as AM, I will need to get another AM top cover.

Last edited by gctkaz; 2015.04.11 at 11:23 AM.
gctkaz is offline   Reply With Quote
Old 2015.04.12, 12:06 AM   #2
TheSteve
VE7FM
 
Join Date: Oct 2010
Location: Langley, BC
Posts: 629
Wow, sounds pretty weird, almost like the pot is wired wrong. Will you be at the meet next Sunday(19th)? If so bring it with you and we'll take a look.
TheSteve is offline   Reply With Quote
Old 2015.04.12, 12:20 AM   #3
gctkaz
Registered User
 
Join Date: Jan 2012
Location: Vancouver, Canada
Posts: 271
I did try switching the pot wires around and it still seemed to have the same behaviour. The wires are all back to the way they were now. The AM board I am using now (RV Project/Atomic) came with the servo motor wires reversed, but this RA-31 is totally weird.

I am going to be out of town so I will miss the next meet, but I can bring the board over next time I can actually make it out. Thanks for the offer Steve!
gctkaz is offline   Reply With Quote
Old 2015.06.14, 10:26 PM   #4
gctkaz
Registered User
 
Join Date: Jan 2012
Location: Vancouver, Canada
Posts: 271
Update on the situation, I think the problem was that there were some crossed wires on the board, there might have been a tiny contact between one of the servo motor wires and one of the pot wires that was just barely visible, but whose existence was enough to cause these problems.

I resoldered the wires, additionally had to reverse both the servo pot wiring and the servo motor wires, and now the board works normally, bound to a TM-002 FlySky module. Very weird that the board would have had such QA issues straight from the factory.

Anyway, really hope I can have this machine out on the track at the next meet!

As an additional question, I only probed around the board a little bit but didn't really find a suitable power source for running auxiliary devices from the board. For now I have soldered two micro Deans connectors directly to the chassis battery terminals to run a Trackmate transponder and an ATtiny45-based LED controller, and while the Trackmate seems OK, my LEDs cut out whenever I give a burst of throttle.
I have a similar LED controller attached directly to the battery terminals of a MR-03 ASF chassis and the LEDs don't brown out like this...

edit: I added an inline 5V step-up/step-down regulator to my LED controller circuit and it seems to work fine now.

Last edited by gctkaz; 2015.06.18 at 02:09 PM.
gctkaz is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
015 or 020 shaggy33 Mini-Z AWD MA-010, MA-015 5 2014.02.08 07:24 AM
FS: KO Propo 2.4 GHz Module & Receiver Bundle for EX-10 Helios Mrs Mini-Z Mini-ZRacer.com Direct Marketplace 0 2012.11.20 12:41 PM
Wanted - USED AWD MA-010 RECEIVER pbair Mini-Z Marketplace 0 2008.05.17 01:26 AM
Personal lap timer counter CHEAP! 46u Lap Timing Systems and Software 10 2006.02.14 03:50 PM
do you use a 27 mhz am or fm receiver w/stock radio aaron Parts and Hop-ups 1 2003.05.14 06:44 PM


All times are GMT -5. The time now is 01:26 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2011 Mini-ZRacer.com
Mini Inferno Sale - Up to $85 Instant Savings!
Micro-T Hop-Ups
RC18R, M18, Micro RS4, Mini-LST, TamTech-Gear, Minizilla, RC18T, RC18B, RC18MT
shop.tinyrc.com Products

more»
Tiny RC Community News
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated. The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year.  Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All! Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»
Mini-Z, Mini-Z Racer, MR-02, MA-010
M18, M18T, RC18T, Mini-LST, Mini-T, Micro RS4, XRay, 1/18, 18th scale
XMODS, XMOD, Micro Flight, ZipZaps, ZipZaps SE, Bit Char-G, MicroSizers, TTTT, Plantraco Desktop Rover, SuperSlicks, Digi Q
Mini Inferno, Mini Inferno ST, half EIGHT, 1/16, 16th scale
Epoch, Indoor Racer, 1/43, 43rd scale
E-Savage, eSavage, eZilla, e-Zilla, HPI
Robots, Bots, Bipeds, Wheeled, Manoi, Roomba, NXT, Lego, Hacking
Crawling, Crawlers, Micro, RC, Losi Mini-Rock Crawler, Duratrax Cliff Climber
Kyosho Minium, Caliber 120, Minium Forums
Mini-Z Hop-Ups, Mini-Z Parts, Mini Inferno Hop-Ups, Mini Inferno Parts, M18 Hop-Ups, M18 Parts