Just too nice to Race the Reds yet! When more avaliable, then start hecking it to race trim.
__________________
MRX Mclaren MP-12CGT3 PN 43T LIPO: X2
MR-03 Mclaren MP-12CGT3 AT70T
PN 2.5 Mclaren MP-12CGT3 PN50T
MR-03 S2K Narrow AT60T Nihm
MR-03 BRZ Narrow PN70T Nihm
MR-03 Enzo Ferrari GT Concept Xspeed SP2012
MR-03VE 2005 NSXGT AT 12000KV w/Lipo
MR-02 Nissan R390 GT Lemans 39T PN
AMZ Benz TC 8500KV
X Power IDT Ultra 5600KV Audi
X Power IMT Ultra 6800KV M3
MB-010 FT86 Comic Racer 39T PN
MF-015 Mclaren MP4-25 50T w/Lipo PN
MR-01 Mugen NSX-GT 02 X Speed Retired
dNaNo FX-101MM T2 XANAVI NISMO GT-R
***************************************
MAJ'S HOBBY SHOP " A Place To Escape from Reality"! TD
214 State St. Suite 209
Hackensack, NJ 07601. 201-820-1347
LIVE Mini-Z RACING EVERY Fri at 7 PM.
Outdoor Saturday On Road Racing 1/8GTVE,1/10TC&USGT
Finally got a chance to drive the Autoscale last night...
Crap, my 599 and Mosler are officially being retired. The Audi is a little less stable on-throttle than either of them, due to lack of rear weight, but turn-in and corner speed are absolutely amazing. Much faster than the 599 and a little faster than the Mosler, and per transition/chicane you pretty much pick up 1/10 of a second because the R8 is so light and so low.
Absolutely brilliant, can't wait to get my white body painted up. Also, should probably be banned or regulated in Box Stock classes such that it doesn't have such a ridiculous advantage.
So far, so good. Got to test/run it last Sunday. Felt pretty much like Brian (color) said and thats with +3 all around on a medium, fast and tight areas track. Working on different body tweeks.
I always pop the side clips out and gluestick them back in, lets me set the height perfectly if I work fast at it too. While the hotglue is still in it's malleable state, I pop the body onto the chassis and set it up by pulling or pushing on the body, setting it on a flat surface to eyeball it. Once it's set, I usually melt the plastic inside the clips with a heated allen wrench right where it goes into the chassis, just a little bit though... A little smush of the things, just enough to make them stick into the chassis.
Oh, and try to use the yellowish type gluestick, the clear stuff doesn't really form too solid or sticky.
__________________
My Online Design Studio and Shop!
A good strong rubber band around the body then a steady but careful application of heat along the sides below the windows with a heat gun or a decent hair dryer until the body starts to relax and the sides give against pressure from the rubber band. Let cool and mount to chassis.
I started off with 98MM, +2 Front and Rear, with Kyosho 10 Rears and Kyosho 30 fronts. Set up seemed to be fine. I went over to Cristians house (Reflex Racing) and he helped fine tune my MR-03. Lap times dropped .4 sec the first day!
I want to try the +3... but it looks like i will have to grind off some of the front fenders.. they are close with 2mm.
I use the white auto scale.... and I do the same when i mount the body. I have glue that sets up in about an hour. i glue it and set the height.
Kinda just got back into Mini-Z.. i was a die hard ENZO person.. but now i like the R8 so much better... very stable... i wish the 10's in the rear would last a bit longer... i go thru tires like crazy!
I started off with 98MM, +2 Front and Rear, with Kyosho 10 Rears and Kyosho 30 fronts. Set up seemed to be fine. I went over to Cristians house (Reflex Racing) and he helped fine tune my MR-03. Lap times dropped .4 sec the first day!
I want to try the +3... but it looks like i will have to grind off some of the front fenders.. they are close with 2mm.
I use the white auto scale.... and I do the same when i mount the body. I have glue that sets up in about an hour. i glue it and set the height.
Kinda just got back into Mini-Z.. i was a die hard ENZO person.. but now i like the R8 so much better... very stable... i wish the 10's in the rear would last a bit longer... i go thru tires like crazy!
Don't Worry, +3 all around in PN, Atomic, or TRP wheels works like a charm and no rubbing at all.
I have been Racing R8 LMS every Friday night club race since 8/2012 so I can voucher for it!
__________________
MRX Mclaren MP-12CGT3 PN 43T LIPO: X2
MR-03 Mclaren MP-12CGT3 AT70T
PN 2.5 Mclaren MP-12CGT3 PN50T
MR-03 S2K Narrow AT60T Nihm
MR-03 BRZ Narrow PN70T Nihm
MR-03 Enzo Ferrari GT Concept Xspeed SP2012
MR-03VE 2005 NSXGT AT 12000KV w/Lipo
MR-02 Nissan R390 GT Lemans 39T PN
AMZ Benz TC 8500KV
X Power IDT Ultra 5600KV Audi
X Power IMT Ultra 6800KV M3
MB-010 FT86 Comic Racer 39T PN
MF-015 Mclaren MP4-25 50T w/Lipo PN
MR-01 Mugen NSX-GT 02 X Speed Retired
dNaNo FX-101MM T2 XANAVI NISMO GT-R
***************************************
MAJ'S HOBBY SHOP " A Place To Escape from Reality"! TD
214 State St. Suite 209
Hackensack, NJ 07601. 201-820-1347
LIVE Mini-Z RACING EVERY Fri at 7 PM.
Outdoor Saturday On Road Racing 1/8GTVE,1/10TC&USGT
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»