Yes, you should be able to. You just need to use the larger servo motor from the MR02. Might need to reverse the wires for the motor, I don't remember the orientation, it's been a while. Cut holes in the PCB cover for the different ICS port on top.
__________________
EMUracing Micro RC Syndicate /DG Designs /GSR /Reflex Racing /Fast By Faqish /MurderTown Racing
Also, the MR02 only uses two servo pot wires, and the MR03 has 3. On an MR02, 1 of the wires spans two of the contacts on the pot. With an MR03, each contact gets its own wire.
Quote:
Originally Posted by EMU
Cut holes in the PCB cover for the different ICS port on top.
You have to do this, if you don't, you can't put the cover on. Make sure the hole you cut clears the entire rectangle of the port or you will break the board by pushing too hard when you try to close the cover. Don't ask me how I know. If you want to use the port for anything (lights?), you need to make sure and get the correct disc damper that leaves the port clear.
Also, FYI, if you haven't already seen them, there are several threads about the Das Mikro ASF clone board, and putting those into MR02s. I have 2 cars like that, where I replaced the 27AM MR02 board with an MR03 ASF clone board.
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»