sorry was a typo.....really nothing exists above 45000? shame then i dont know how i can make this thing buzz more than 50kph....how do they get it so fast on youtube?
sorry was a typo.....really nothing exists above 45000? shame then i dont know how i can make this thing buzz more than 50kph....how do they get it so fast on youtube?
I know the become much faster on lithium batteries. The rpm listed on the chart is probably the normal 4 AAA voltage. I believe you can run 7.4 volt lithium with no major issues. The steering is the main problem at higher voltage. Also run FET stack with the lowest turn motor it can handle. An odd trick to get more rpm is to stick neodymium magnets to the outside of the motor can. Also run the tallest gearing you can with trued tires. I can't really think of much else right now. I'm not sure exactly why you would want a mini-z this fast other than to say say you did it. I can't really recommend all this unless you have deep pockets.
__________________
Some say he never blinks, and that he roams around the woods at night foraging for wolves... all we know is, he's called The Stug.
I just trued some GRP foams to 25mm... mounted on an F1 rear axle (wider offset = more stable) these would be the best tires for outdoor speedruns. The front tires should be rounded off to soften the steering response and reduce sudden movements.
As for getting RPM... the Plasmatomic (pioneered by ph2t IIRC) is the only motor I know of that can reliably hit 40mph on AAA's, and even that is pushing the limits because the motor (27t) draws a stupid amount of current. Running a milder motor (say, PN 32t) with lithium-polymer or LiFe batteries is a much smarter option and will probably get you a higher net speed due to greater torque at the high end.
Does atomic still make the chilli motor? If I remember right it was quite a powerful motor. I could be wrong though. Does the motor have to be brushed? If not you could go brush-less and get over 45000 rpm easy.
__________________
Some say he never blinks, and that he roams around the woods at night foraging for wolves... all we know is, he's called The Stug.
they do and i have one, im very happy with it! i run with an unfetted mr03 and on the tamyia speed checker (not a true indicator i know but its a bench mark) it can do an easy 54kph. with lith ions batts im sure it goes quicker due to the extra punch. its the fastest motor i have
they do and i have one, im very happy with it! i run with an unfetted mr03 and on the tamyia speed checker (not a true indicator i know but its a bench mark) it can do an easy 54kph. with lith ions batts im sure it goes quicker due to the extra punch. its the fastest motor i have
well i use 1.2 v 1300mah nimh for every day use and use 1.5 v alkalines (just realised my mix up) when they are on offer in the shops, ive never had a fet blow except when the wires from the motor somehow connected, but still run a chilli motor on a unfetted mr03 with out problems
well i use 1.2 v 1300mah nimh for every day use and use 1.5 v alkalines (just realised my mix up) when they are on offer in the shops, ive never had a fet blow except when the wires from the motor somehow connected, but still run a chilli motor on a unfetted mr03 with out problems
sorry dude i dont want to have to call you out on this but.....
in your first post you stated that you run liths and a chilli on a stock board ....imposible it would melt the fets
in your second post you say your using 1300maH AAA's these dont exsit they may well say 1300 on them but trust me they arnt
i made a mistake before with the wrong name for the battery type but here is a link showing the exact ones i have, maybe theyre not 1300mah but they are better than the 970mah ones i have http://www(dot)ricardo(Dot)ch/kaufen...v/an650061738/
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»