Ok, this is not exactly a mini-z problem, but it is a mini-z board. I have a Losi micro SCT with 2.4ghz mini-z electronics. The problem I have been having is the motor will only work for a few seconds at a time and then stop. The motor is a stock losi micro motor and the battery is a 7.4v 250mah Lipo battery. What would cause the car to run and stop after a few seconds. Also it will run as long as I don't stop. If I stop the car's motor will stop responding, but the servo still works so it is recieving the signal. I also can't brake or reverse because that involves returning the throttle to a neutral position. Anyone know what is wrong?
__________________
Some say he never blinks, and that he roams around the woods at night foraging for wolves... all we know is, he's called The Stug.
The motor should be pretty tame its a stock losi micro motor, which is smaller than the 130 size mini-z motors. I would think that this motor wouldn't draw much current, but I could be wrong. Anyway I think I'm going to try a different stock motor.
__________________
Some say he never blinks, and that he roams around the woods at night foraging for wolves... all we know is, he's called The Stug.
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»